Home > Products > Consumer Electronics & Lighting > Lighting > Bulb & Lamp

E40/E27 60W LED Post Top Retrofit Lamp - 85~277VAC - Epistar 5730SMD - 6300Lm - 250W HPS replacement - EU Energy Saving Approved

1. Light Source:186pcs 5730 Epistar SMD
2. Luminous Flux:6300Lm
3. Rated Wattage:60W
4. PF>0.9
5. Base Options: E40/E27  E39 mogul / E26 medium
6. Input Voltage: 85~265VAC,50/60Hz (277VAC available)                                    
7. Color Temperature:3000~3500K/4000~4500K/6000~6500K
8. CRI > 75

9. Beam Angle:360°
10. striped transparent cover+heat sink built-in
11. Lifetime: 50,000+ hours
12. Size: E40: Φ111.5*308mm
              E27: Φ111.5*295mm
13. IP Rating:IP34 (Dust and humidity proof)
14. Body Temperature:<55℃  @Ta=25 ℃                                   
15. Isolated power supply
16. CE,ROHS approved
17. Replacement:250W Matel Halide / HPS

LED Post Top Retrofit Lamp Features

1. Using high brightness of original packed Epistar 5730 SMD chip which acieves 100lm/w and high CRI >80

2. As the world's first new products,this 60W LED Post Top Retrofit Lamp could replace the conventional compact CFL light directly .

3. Unique construction  design with full  beam angle (360°)

4. Fin aluminum heat dissipation system(patent design).

5. No spot, no black area, long life span and less brightness decay

6. Various lamp holder are available , a wide range of applications.(E39/E40, E26/E27)

7. Wide voltage AC100-277V,High efficiency constant current drives, Efficiency of power supply is more than 90%.

8. By using Fans protection circuit ,when fans do not work, the power of whole lamp will be reduced down to  50% to ensure  the safety of the lamps.

9. No magnetic disturbance influence and CE & RoHS standard compliant

10. No UV and near-IR radiation in the light beam.

11. 3 years warranty

     What should be awared of ?

1. Read the user’s manual in details, make sure the environment conditions fits the requests

2. Cut the power off before installation

3. Do not plug it to 277VAC unless it’s labeled.

4. Do not install this 60W LED Post Top Retrofit Lamp in ambient where has high temperature over like 55 celsius degree or over corrosive gas

5. Indoor & outdoor use

6. Don't throw away casually

Please contact Lamp Shining for IES file for a lighting simulation