electron Infusion Pump LC1003
Product Description
Main Features for LC-1003 Infusion Pump:
1.with bolus rate
2.Available for most brand of I.V sets after an easy calibration
3.with internal battery which can be disassembled for easier transportation.
4.the flow rare in ml/h and drop/min can convert automatically.
5.Double MPU in work to ensure system security
6.With intelligent interface on back panel,can update unit software & connect to nurse call jack
7.Ultrasound detection of air and selectable drop sensor can make the infusion safer.
| Model No. |
LC-1003 |
| Range of pre-set of infusion rate |
1.0～1200ml/h (0.1ml/h step 1.0～99.9ml/h;1ml/h step 100～1000ml/h) |
| Bolus rate |
800～1200ml/h(default value is 800ml/h) |
| Range of pre-set of infusion volume |
1-9999ml |
| Indication range of volume infused |
1-9999ml |
| Use of syringe |
Comply with all brands after calibration |
| Infusion precise |
±5% |
| Bubble sensitivity |
Detestability of air bubble ≥40uL |
| Occlusion alarm pressure |
100KPa±20KPa |
| Alarming |
Air Bubble, Occlusion, Door Open, Complete infusion, Low power, Motor failure,Drop abnormal, Low temperature,Pause overtime ,Electrical circuit jam,Error set of accuracy,Air detect circuit error,Motor control error,Battery exhausted |
| KVO rate |
KVO rate as at 1ml/h with flow rate no higher than 10ml/h; as at 3 ml/h with flow rate higher than10ml/h |
| Internal battery |
Fully charged 6 hours, the internal DC12V Ni-MH battery can continuously run over 4 hours at average rate level |
| Power |
100-240VAC 50/60Hz |
| Power consumption |
18VA |
| Working enviroment |
Operation Temperature |
5℃-40℃ |
| Atmospheric Pressure |
700hPa-1060hPa |
| Ralative Humidity |
20%-90% |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
