Home > Products > Computers & AV Digital > Network Hardware & Parts

poe

Specification 
Power input: 180VAC-264VAC, 50/60Hz
Input current: 2A/230VAC
Voltage range (at PSE): 48VDC
Maximum current(at PSE): 500mA per port
Operating temperature: -10°C~+60°C
Mass: 3.2Kg

Power Source Equipment (PSE) surpply power to PD,such as IP camera,IPphone,IP Dome,AP and so on. 
 

The NETCOM POE devices are designed for telecom carrier, telecom level Power Supply
Equipment. The device implemented more sufficient and advanced MCU controll technology.
Total power, individual port power, port status and device temperature are displayed on LCD

NETCOM POE SWITCH Features:

1.Brand-new design, multi-function LCD display with backlight
2.Total power and individual port power in one sight
3.More effective short circut and overload protection, individual
4.port reset and more new techchnology implemented
5.Support 10/100/1000M ethernet network, 8-16 port, output 25W max per port.
6.User can reset the whole device or any individual port.

NETCOM POE SWITCH Specification:

Language Option:

Switch languge to help reading: French German Italian Russian Spanish Portuguese

• French
• German
• Italian
• Russian
• Spanish
• Portuguese

The data above is only for reference and any change of them will not be informed in advance. For more detailed technical inquiries, please feel free to call the Technical Department of our company.

Features

 
1.LCD display and control panel, display the total power, power of each port, the working temperature, etc.
 
2.The entire device or any single port reset
 
3.Extensive status indication. ALARM general alarm indicator, if any failure of equipment, ALARM red lights flash; working status indication for each port, it is normal work hours when turns green, abnormal blinking.
 
4.More effective protection circuit, output protection on each port, short circuit, overload protection. When each network power output short circuit or overload to protect the port, the corresponding alarm indicator light flashes. 
It does not affect the other ports work.
 
5.Total power overload protection, when all individual port power is over the total power; ensure that the total power to work normally within their areas; shut off the over individual power port in the back, which ensure that the equipment will not exceed the total power of all the ports caused by the entire device is not working normally.
 
6.The device support 8-16 port, output 25W max per port.

7. Lightning protection characteristic: AC input, can endure 5KA, 8/20uS current pulse of positive and negative 5 times each, time interval 1 minute; lightning protection circuit has a failure alarm function, insurance management and other security components
 
8.System reliability   MTBF>100k hours.