Home > Products > Electronics & Electricity > Other Electrical & Electronic

NSK Dental Slow Low Speed Handpiece Complete Kit EX-203C Set 4 Holes E-type

Features of NSK Dental Slow Low Speed Handpiece Complete Kit low speed handpiece
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical autoclave

Contra angle handpiece
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors

Straight Nosecone
- Working pressure: 0.3MPa (4-hole);
- 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.

Air Mortor NSK Dental Slow Low Speed Handpiece Complete Kit low speed handpiece
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- Midwest 4 holes
- Max speed 20,000 min-1

Packing List
- E-type air motor NSK Dental Slow Low Speed Handpiece Complete Kit low speed handpiece Midwest 4-Hole: 1 each
- Straight nose cone: 1 each
- Contra Angle handpiece: 1 each
- Water spray nozzle: 1 each
- Oil spray nozzle: 1 each
- CAP Spanner: 1 each
- English manual: 1 each