| Model: | - |
|---|---|
| Brand: | huiyuan |
| Origin: | Made In China |
| Category: | Construction & Decoration / Waterproof Materials |
| Label: | self adhesive , waterproof membrane , bitumen membrane |
| Price: |
-
|
| Min. Order: | 100 pc |
| Live Chat: | Last Online:07 Nov, 2013 |
self adhesive waterproof membrane
is made of SBS elastomer and bitumen as basic material, and polyethylene
film, aluminium foil as surface finished material. One kind is with polyester reinforcement, the thickiness has 1.0mm, 1.5mm, 2mm, 3mm, 4.0mm ,another kind is without reinforcement, any thickness is available.
1. Characteristic
Self-adhesion without bonding agent,torching.
Good rubber elasticity,and elongation.Excellent adhension bond.Good self-coalescence.Safe application,no pollution.Excellent waterproof and high strength.Corrosion resistance and ageing-resistance.Available for wet ground.
2. Specification:
Thickness: 1.0mm,1.2mm 1.5mm 2.0mm ,3.0mm,4.0mm.
Length: 10m 15m 20m Width: 1.0m -2.0m Surface: Aluminum, PE film,HDPE film, etc.
3. Application
It is widely used for the waterproof and dampproof of the roofs, basements, swimming poll, tunnels, etc, of industry and house building, and the waterproofing of wooden and metal structure roof. The fire is strictly forbidden.
Technical property:
|
Item: Both sides Self-adhesive Bitumen Waterproof Membrane |
|||||||||
|
No. |
Test Item |
Test Standards |
Test Results |
Vertification |
|||||
|
1 |
Water tightness |
Mpa |
≥0.3 |
No leakage |
Pass |
||||
|
holding time (min) |
≥120 |
||||||||
|
2 |
TensionN/50mm |
2.0mm |
350 |
358 |
Pass |
||||
|
3.0mm |
450 |
480 |
Pass |
||||||
|
4.0mm |
450 |
498 |
Pass |
||||||
|
3 |
Enlongation at break, % |
≥30 |
39 |
Pass |
|||||
|
4 |
Heat resistance |
70°C,no glide no flow, no drop |
no glide no flow, no drop |
Pass |
|||||
|
5 |
Cold flexible |
. -20°C,No cracking |
No cracking |
Pass |
|||||
|
Conclusion |
All test are qualited based on the Ref Standards:GB23441-2009's conventional items and instruction . |
||||||||
|
Remarks |
|||||||||
4.Procedures
Installation preparation → Substrate treatment → coat related substrate primer → detail additional waterproof layer installation → set datum line → main selfadhesive membrane installation → exhaustion of air and surface rolling (steel wheel) → overlaps compaction and edges sealing → vertical membrane terminals fix and sealing by membrane sealant inspection → installation of protection and insulation layer
