Sliced noodles machine features:
1, look clean and tidy. The body is made of stainless steel material in accordance with the human body shape is most pressing, equipped with a power device and a driving device, peripheral device. The supporting plate CNC screw drive, feed more accurate, beautiful face shape
2, light weight, overall weight: about 100 kilograms. The size of the whole machine: 950 * 850 x 1400
3, power saving, no more than 3 kilowatt hours every 12 hours.
4, the work efficiency is high, compared with the manual technician, there is no fatigue and emotional factors. No expenses, wages, housing and welfare expenses can be a long-term benefit. It's your best choice.
5, cut out the noodles shaped like a willow, length and width of uniform thickness, whether this is the general taste, artificial mechanic is difficult to achieve, and low failure rate, easy operation and maintenance.
Operation and adjustment of the robot Sliced noodles machine:
1, plug in the power supply.
2, press the rise button, so that the right arm of the machine rises to the highest position.
3. Knead the good dough into a crescent shape, and then put it on the left arm's panel.
4, press the drop button, then drop the right arm of the handheld blade, and stop at the 0.5mm position on the surface of the dough.
5, press the start button to make the machine into the formal surface state.
6, according to the number of one-time sections can be freely adjusted, small bowl bowl. For example, if you need three large bowls, you can set the large bowl to 3, then press the F1 key, and you can run it. Generally, the large bowl can be set to 150-200, and the length of the base and the size of the bowl are set freely.
7, the thickness and the size of the dough bowl seconds adjustment; surface thickness, the size of the bowl number of seconds, can be adjusted freely according to the needs of users of the skin thickness.
8, the width of the film adjustment: the screws are turned outward and the face is widened, and the face is narrowed to the inside, which can be adjusted at random according to the requirements of the customer.
