Model: | - |
---|---|
Brand: | Carwanta |
Origin: | - |
Category: | Electronics & Electricity / Battery, Storage Battery & Charger |
Label: | Jump starter , auto emergency power , jump start |
Price: |
¥43.8
/ pc
|
Min. Order: | 100 pc |
Live Chat: | Last Online:22 Aug, 2013 |
Size: |
160*75*28mm |
Weight: |
350g |
Output: |
5V/2A; --- Mobile phone, Tablet PC, PSP, MP3/MP4. 12V/2A; --- Car refrigerator, blast pump, etc. 19V/3.5A; --- Laptop PC Jump start;--- 12V vehicle LED light --- (light, burst flashing, SOS) |
Input: |
12V/2A |
Starting Current: |
200A |
Peak Current: |
400A |
Operating temperature : |
-20℃~ 60℃ |
Parts List:
# |
Parts Name |
Quantity |
1 |
Host |
1 |
2 |
Mobile phone switch cable |
1 |
3 |
Notebook switch cable |
1 |
4 |
Mobile phone connector |
8 |
5 |
Notebook connector |
8 |
6 |
Home Charger |
1 |
7 |
Car charger |
1 |
8 |
Jumper cable with clamps |
1 |
Instructions for use:
1、Select the appropriate voltage and connector for the electronic device to charge / power supply
2、Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3、Five lights will flash circularlyduring the charging by EPOWER and all lights will keep bright when your device is full-charged
4、During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash
5、Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6、Store the product in a cool and dry place and away direct sunlight.
Jump start 12V vehicle Instruction:
1. Make sure that the number of indicators is not less than 3 ones.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from EPOWER and disconnect RED and BALCK clamps to the vehicle battery.
6. Leave the vehicle's engine running.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA, notebook as well as other products charge / power supply;