Model: | - |
---|---|
Brand: | - |
Origin: | - |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | 532nm 1000mw 1W , 1W DPSS Green Laser , 532nm 1W 2w 3w 5w DP |
Price: |
-
|
Min. Order: | - |
Live Chat: | Last Online:28 May, 2014 |
Wavelength (nm) | 532 |
Output Power (mW) | >1000 |
Input Voltage (V) | AC 90~260 |
Operating Mode | CW |
Cooling Mode | TEC & Air |
Transverse Mode | TEM00 |
Beam Diameter at the Aperture (mm) | ~2.5 |
Divergence , Full angle (mrad) | 2.0 |
Power Stability (RMS/4 hrs) | <5% |
Operating Temperature (centi-degree) | 10~35 |
Modulation Mode (TTL / Analog) | Optional ( up to 30kHz) |
Laser Head Dimensions ( L x W x H, mm ) | 150 x 75 x 50 |
Power Supply Model | FDA-100B / OEM-100B |
Expected Lifetime (hours) | 10000 |
Warranty Period | Paid Maintenance |
Fine spot:
G1W 532nm(1000mW-1200mW)---------$650/pcs
G1.5W 532nm(1500mW-1700mW)---------$880/pcs
G2W 532nm(2000mW-2100mW)---------$1444/pcs
G3W 532nm(3000mW-3200mW)---------$1999/pcs
G5W 532nm(5000mW-5200mW)---------$5000/pcs
*If you buy more than 5pcs, you can contact us e-mail request a new quote.
Instructions for use:
Plug in the power plug and then turn on the switch. Energized after 10 minutes of power into a stable state. Switching power supply should be more than 5 seconds interval, or fragile laser.
2. Use the power board should be placed on an insulator or overhead, or roasted bad laser power. The laser and the power cable at the same time not let received a large external force, so as to avoid the lasers internal cable disconnection.
3 for laser cooling, place the laser fixed on a flat metal plate.
The Note. Dust, not much of a place in the dust, if the laser is not a long time in the light hole at Paste dustproof paste.
Note:
1 laser and power should avoid the the strongly collision and vibration.
Do not direct laser irradiation to the human and animal body, especially the eyes, and light-sensitive organ, or likely to cause injury.
Do not dismantle lasers and power, where unauthorized demolition is not within the scope of the warranty of the Company.