| Model: | RS-6000W |
|---|---|
| Brand: | Pocasa |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Power Supply & Distribution / UPS |
| Label: | solar inverter , solar charger , 6000w solar inverter |
| Price: |
US $631
/ pc
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:07 Mar, 2014 |
►High overload ability up to 300% rated power (20 sec)
►DC13V battery recover point, dedicated for solar systems
To solar charger:
►MPPT function with high efficiency 97%
►Auto input DC voltage detect between 12V/24V
►Reverse current protection, battery temperature compensation
To battery charger:
►3 step intelligent battery charging (bulk, absorption, and float)
►8 pre set battery type (flooded lead acid, gel, or absorbed glass mat (AGM) batteries) selector
plus de-sulphation for totally flat batteries
►Powerful charge rate up to
►PFC (Power Factor Correction) for charger, less power consumption than conventional units
To transfer:
►10ms typical transfer time between battery and AC, guarantees power continuity
►15s delay before transfer when AC resumes, extra protection for loads when used with generator
►Input AC voltage range selectable (184-253V or 154-253V) for different kinds of loads
►30/
►Allows start up and through power with depleted batteries
To remote control & others:
►Ability to switch the unit on/off, select/deselect power saver mode
►17 alarms/warnings, informative for easier operation and trouble-shooting
►Front panel LED indicators and adjustable switch selectors
►Battery/AC priority switch available for off grid solar/wind system
►Low battery, overload, and high battery, over temperature protection circuitry
►RS232/USB communication port available
►Generator compatible
Technical specifications:
General specifications: | ||||||
Input wave form: | Sine wave(Utility or generator) | |||||
Nominal voltage: | 120VAC | 230VAC | ||||
Low voltage trip: | 90V+/-4% | 184V/154V+/4%- | ||||
Low voltage re engage: | 100V+/-4% | 196V/164+/-4% | ||||
High voltage trip: | 140V+/-4% | 253V+/-4% | ||||
High voltage re engage: | 135V+/-4% | 243V+/-4% | ||||
Max input AC voltage: | 150VAC | 270VAC | ||||
Nominal input frequency: | 50Hz or 60Hz(Auto detect) | |||||
Low frequency trip: | 47Hz for 50Hz, 57Hz for 60Hz | |||||
High frequency trip: | 55Hz for 50Hz, 65Hz for 60Hz | |||||
Output wave form: | (Bypass mode) same as input | |||||
Overload protection: | Circuit breaker | |||||
Short circuit protection: | Circuit breaker | |||||
Transfer switch rating: | 30 amp or 40 amp | |||||
Efficiency on line transfer mode: | 95%+ | |||||
Line transfer time: | 10 ms typical | |||||
Bypass without battery connected: | Yes | |||||
Max bypass current: | 30 amp or 40 amp | |||||
Bypass over load current: | 35 amp or 45 amp: alarm | |||||
Inverter specification/output | ||||||
Output wave form: | Pure sine wave | |||||
Output continuous power watts: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
Output continuous power VA: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
Power factor: | 0.9-1.0 | |||||
Nominal output voltage rms: | 120/230VAC | |||||
Output voltage regulation: | +-/10% rms | |||||
Output frequency: | 50Hz+/-0.3Hz or 60Hz+/-0.3Hz | |||||
Nominal efficiency: | >88% | |||||
Surge ratings: | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
Short circuit protection: | Yes, fault after 1 sec | |||||
THD | <3% | |||||
Inverter specification/input: | ||||||
Nominal input voltage: | 12.0V | 24.0V | 48.0V | |||
Minimum start voltage: | 10.0V | 20.0V | 40.0V | |||
Low battery alarm: | 10.5V/11.0V | 21V/22.0V | 42.0/44.0V | |||
Low battery trip: | 10.0V/10.5V | 20.0V/21V | 40.0V/42V | |||
High voltage alarm: | 16.0V | 32.0V | 64.0V | |||
Low battery voltage recover | 15.5V | 31.0V | 62.0V | |||
Power saver: | Below 25 watts when enabled | |||||
Power saver: | Same switched on/off on remote | |||||
Charger mode specifications: | ||||||
Input voltage range: | 90-135VAC | 194-243VAC/164-243VAC(W) | ||||
Output voltage: | Dependent on battery type | |||||
Max charger current: | ||||||
10-15.7V for 12V(*2 for 24V; *4 for 48V) | ||||||
Over charger protection shutdown: | 15.7V for 12V(*2 for 24V; *4 for 48V) | |||||
Solar charger mode specifications: | ||||||
Rated voltage | 12V/24V/48V | |||||
Rated charge current | ||||||
Rated output current | ||||||
Self consumption | <10mA | |||||
Bulk charge | 14.5V(default)*2 for DC24V, *4 for DC48V | |||||
Floating charge | 13.5V(default) | |||||
Equalization charge | 14.0V(default) | |||||
Over charge disconnection | 14.8V | |||||
Over charge recovery | 13.6V | |||||
Over discharge disconnection | 10.8V(default) | |||||
Over discharge reconnection | 12.3V | |||||
Temperature compensation | -13.2mV/’C | |||||
Ambient temperature | 0 | |||||
Mounting | Wall mount | |||||
Charger curves (4 stage constant current) battery types | ||||||
4 steps digital controlled progressive charge | ||||||
Fast V | Float V(*2 for 24V; *4 for 48V) | |||||
GEL | 14.0 | 13.7 | ||||
A.G.M. 1 | 14.1 | 13.4 | ||||
A.G.M. 2 | 14.6 | 13.7 | ||||
Sealed lead acid | 14.4 | 13.6 | ||||
GEL Euro | 14.4 | 13.8 | ||||
Open lead acid | 14.8 | 13.3 | ||||
Calcium | 15.1 | 13.6 | ||||
De-sulphation | 15.5 for 4 hrs | |||||
Remote control/RS232/USB | Yes, optional | |||||
Size: in mm | 1000/2000/3000 model: 580*315*300 mm3 | |||||
4000/5000/6000 model: 740*315* | ||||||
| ||||||
