Home > Products > Industrial Supplies > Construction Machine

RC/6000E anti-collision and zone protection system can be applicable to both level-jib tower crane and luffing tower crane. One unit includes the following components: LCD monitor, control cabinet, sensors, control output cable, wireless communication module and so on. According to the information of site, tower crane and its working condition, the controller can surveillance and prevent any collision between tower cranes, the hook going into the prohibited area. Each set on tower crane could real time feed back the actual load and prevent the maneuver of over loading.

Main Functions

Measurement. Real time measure the slewing angle of main jib, radius of trolley (angle of jib and radius of tip for luffing tower crane).

Indication. Real time indicates the slewing angle of main jib, radius of trolley (angle of jib and radius of tip for luffing tower crane), main jib positions of nearby tower cranes, the position of trolley and so on.

Alarm. Visual-audible pre-alarm when the load or radius reach pre set pre-alarm point; Visual-audible alarm when the load or radius reach pre set alarm point; When one set in the network go wrong, the alarm light at top of cabin(option) will give alarm.

Anti-collision. According to the real time positions of tower cranes, allow or prohibit the movement of trolley and slewing. Include 11 contacts: 4 contacts for trolley(high speed forwards, low speed forward, high speed back wards, low speed back wards); 7 contacts for slewing(left high speed, left low speed, right high speed, right low speed, left inverse ejecting, right inverse ejecting, braking).

Wireless Communication. Each controller could communicate wirelessly among tower cranes and accomplish anti-collision and zone protection. Each controller could be added or quit the network without effecting other tower cranes' work.

Data Set and Wirelessly Upload. All the data about site, tower crane and zone could be set on the computer in the office and wirelessly upload them to each controller on the tower crane,

Sensors Calibration. Calibration and measurement could be achieved by several simple operation after installation.

Records of controlling. All the records of controlling can be stored in the controller, which can be downloaded to surveillance computer for checking.

Updating of load chart of tower crane. Common load chart of tower crane have been stored in the controller and it could be updated by customer himself( this one will be realized in latest edition. The customer is required to install and operate Microsoft Access)

Authorization of Operation( will be realized in latest edition). In case of unauthorized operation, an authorized password is required for data setting and operation.