| Model: | ETCR1000C |
|---|---|
| Brand: | ETCR |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Electricity Meter & Instrument |
| Label: | - |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:15 Jul, 2013 |
|
Convenient Operation
|
Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient.
|
|
Multi-Purpose
|
In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens.
|
|
Dynamic Display
|
LED dynamic display, intuitive and clear
|
|
Sensitive and reliable
|
More sensitive ETCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity.
|
|
Beautiful and scientific
|
The three clamps of ETCR1000C are in three colors, Red, Yellow and Green; It is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance.
|
|
Ultra-low Power Consumption
|
ETCR1000C has a better power-saving performance with the maximum rated power of 100mVA.
|
|
Phase detection (normal phase, reverse phase and phase deficiency), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance.
|
|
|
Power Supply
|
DC3V AA MN batteries (R6P) ×2 PCS, Continuously working for 200 hours
|
|
AC Voltage Range(V)
|
AC0～600V, 40～70Hz (Sine Wave Continuous Input)
|
|
Clamp Wire Size
|
Diameter ø1.6-ø16mm
|
|
LED Display
|
【Positive Phase Sequence】
The four phase-sequence lamps blink in order (clockwise).
【Negative Phase Sequence】
The four phase-sequence lamps blink in order (counterclockwise).
【Line-voltage Indication】L1,L2,L3 lamp light up.
【Default Phase】L1/L2/L3 lamp is off.
【Open Circuit】L1/L2/L3 lamp is off.
|
|
Power On Indication
|
Power on indication light turns on
|
|
Auto Power off
|
After 3 minutes, the meter automatically cut off power supply.
|
|
Meter Dimension
|
Width, height, thickness 70mm*75mm*30mm
|
|
Clamp Lead Length
|
0.5m
|
|
Meter Weight
|
180g (with battery)
|
|
Working Temperature and Humidity
|
-10℃～55℃; below 80%rh
|
|
Storage Temperature and Humidity
|
-20℃～60℃; below 90%rh
|
|
Maximum Measured Voltage
|
AC600V
|
|
Dielectric Strength
|
5.4kVrms
|
|
Maximum rated Power
|
100mVA
|
|
Safety Provisions
|
EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT Ⅲ(600V), Transient over-voltage 6000V
|
|
Accessories
|
Meter: 1 Piece; Carrying case; 1 Piece.
|
