Insulation Piercing Connector (low voltage) JMA2-95
Product Description
Insulation Piercing Connector JMA2-95
Specification:
Main mm2
|
Branch mm2
|
piercing depth
|
rating current
|
weight
|
package
|
16-95
|
4-35(50)
|
≥3
|
200A
|
182G
|
100Pcs/CTN
|
CE.ISO9001, Self-seam frame, waterproof, fire resistant, anti-UV, aerial network, anti-corrosion
Detailed Product Description:
1. JMA2-95 adopted special connecting tablet, apply to joint of Cu(AI)and Cu(AI) or Cu and AI. Fully sealing rubber provides safe live line working.
2. Both main and branch conductor insulations are pierced by a single bolt action. It need not strip the connector insulation. It can do a on the spot branch in random place on the cable for definite range. Take the place of the way of beforehand branch cable. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. The shear head bolt and end cap are insulated. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV.
4. Small electric connecting resistance, impulse current can be up to 15kA. Test voltage 4 kV/50 Hz/1min in water.
5. Small installation space, save the cost of bridge and land construction, full range and types, arc surface design is suitable for connection with the same (different) diameter, wide connection scope simple installing.
6. It has been used safely more than 30 years in abroad. It also has used in many areas in china successfully.
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,