15.6 inch LED TO CCFL LCD Screen Converter Cable 40pin to 30pin LTN156AT01 LP156
Product Description
This cable is used to convert 15.6" 40 Pin LED Screen to 30 pin LCD CCFL Screen.This product can be used in most of laptop models with Dell password data having been initialized.
Please note:
This converter is used to solve the problem of 15.6" CCFL screen shortage, but not solving the problem of adjusting lightness.
Introduction:Before using our products,firstly,you need to remove the original screen and inverter(high-voltage bar) from your laptop. Secondly,connect the 15.6" LED with our converter,in the meantime,the cable from laptop should be connected with our converter's connector(each pin on this connector stays 1mm away from the next one).Thirdly,connect the position where the inverter once connected with port on our converter's PCB board.You can read compatible laptop models written on the board while you connect them.Then,congratulations,you can use your laptop now.
Instruction:
Fasten cables inside laptop avoiding short circuits.Especially,there is 5-21V DC voltage on some pins of the PCB board when laptop works.
Yellow FPC cable can be folded as you require without harming its usage.
But folding the cable repeatedly back and forth is not recommended for it will have bad impacts on converter's circuit.
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
