How it works: crushed pulp, juice, coconut skin through the hopper into the juicer, spiral along the bottom diameter of the material residue outlet direction while gradually increasing pitch decreases, when the material is propeller, because the spiral cavity volume is reduced, the material forming the press. Direction of rotation of the spiral shaft to the slag tap from the feed hopper seen in the direction of clockwise. Material added to the feed hopper in advance of the screw under the pressure, squeezing the juice which passed through the filter into the bottom of the juice is filled, while the waste is of the coil and pressure formed between the tapered portion of an annular discharge gap, the axial movement of the first pressure regulator to adjust the size of the gap. For clockwise (slag from the device into the hopper side tank to see when turning the handwheel bearing, pressure head to the left, the gap is narrowing, the gap becomes larger and vice versa.) To change the size of the gap, that adjustment slagging resistance, slag rate can change, but if the gap is too small, the strong squeeze, some slag particles and juice through a filter being squeezed together, although the juice increased, but the relative decline in the quality of juice, voids size should be depending on the user specific process requirements. Juice so as to achieve the purpose of automatic separation of the slag.
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here
China Suppliers Quick Searching: