Dark&Glow transfer paper Instruction
One.Printer setting
1.paper choose Epson photo quality inkjet paper
2.print quality choose premium photo
3.no need mirror printing
Two. Process
1.print the design on the paper ,cut the blank with scissors or by cutter plotter .
2.peel off the bottom paper from one corner ,put the white printed design on the T-shirt ,put one interleaving paper on it.
3.transfer the dark transfer paper ,set the heat transfer machine:160 degrees Celsius, 10 seconds,medium pressure .
4.transfer the glow transfer paper ,set the heat transfer machine:130 degree Celsius ,10 seconds ,low pressure .
5.peel off the interleaving paper, for glow transfer paper ,please peel after it is cold .
6.interleaving paper can be used again and again .
Three.key point
1.After transfer the dark transfer paper ,it can be stretched right and left ,up and down, which can get better hand feeling .
2.After transfer the glow transfer paper ,put it under the sunlight or light for one hour ,It can keep over 12hours glow.
3.For glow transfer paper ,please choose the light colored picture or word,the lighter of the design ,the stronger of the glow .
4.It is better to print in pigment ink ,sublimation ink can be ok .
Four.About washing
1.Please wash 6 hours later .
2.Do not wash directly to the transferred design .It can be hand wash or machine wash .Wash in reverse side .
3.The right washing way can keep the design longer .