Home > Products > Chemicals > Other Chemicals

NAME: cyclic phosphonate, Bicyclo phosphate ester, Antiblaze-1045 AM45

Fire retardant for cotton hemp rayon etc.

Case no.: 42595-45-5

Model: M103

Brand: MLB

Weight: 70kg/drum

Purity (content, specification): 99%

As a reacting fire retardant with durability,M103 is applied to cotton, hemp, rayon etc.
It can be processed easily on normal textile printing equipment. After flame-proof treatment, the fabric can be washed over 50 times. No afterflame, no smoldering, better Drop strong, good hand-feeling.
It can be widely used on fire clothes, Army war under, work clothes for metallurgy, water and electricity, nuke industry, mine market etc., As well as tent, curtain, bunting. In addition, it is also used widely in paper industry

Specification

Appearance: Colorless or light yellow, thick liquid
Solid content: ≥80%
pH(10g/100ml water,25℃): 6.0-6.5
Impermissibility: Soluble in water, it has good Impermissibility with normal finishing
Agents.
Influence to Colored light and solidness: It slightly affects textile’s colored light and solidness inordinately, but can be adjusted and made up by technological conditions

Properties

1.     Excellent fire-retardant performance to the cotton textile, and fit in with the standard of GB5455-85, standard of BS3210, TY-2500-0009, DOCFF3-71;

2.     2. Durability to washing;

The fabric in neutral soap 3g/L with liquor ratio 1:50, it still can passes vertical burning test.

3. Easy preparation of fire-retardant finishing liquid.
It is can be processed and produced at normal rolling machine, drying machine and
baking machine, no special machines needed.

4. Processed fabric has very good and soft hand-feeling.

Usage

M103 is widely used in flame retarded cotton textile.
1. Fabric requirement: Good Water absorbability, neuter or acidic
   No residual marks, oil stain and impurities are allowed to show on the fabric
2. Flame retardant liquid preparation:

   Heavy fabric requires flame retardant with small concentration, light fabric requires large concentration

3. Recommend dosage and process:
1). Formulation:
    M103， 300-380g/L
    Cross bonding resin 60-80g/L
  Reinforcing agent 18-20g/L
  Catalyst 15-18g/L
2). Working solution introduction:
   Mix resin and auxiliaries according to the formula
   Better dilute the auxiliaries before mix them with resin.
   Only when you use the flameretardant, can you add catalyst to the working solution.

Package

30kgs, 60kgs, 120kgs /bucket (PE bucket) and should load and unload the goods carefully during transportation. Upside down is forbidden. Ventilated and dry air are needed for preservation environment.