Connecting rod type feeding machine
Technology, equipment performance characteristics
1, the main parts and components are imported components, low failure rate, long service life (such as the NSK bearings, KOYO encoder, CPG reducer etc.). 2, the four connecting rod and the worm gear transmission, inverter, the arm to run more quickly and smoothly. 3, use imported PLC and inverter control, so that the arm positioning more accurate. 4, the Chinese man-machine interface touch screen, can be convenient to set the various parameters, real-time monitoring of machine status and fault diagnosis display, make the operation and maintenance are very convenient. 5, the transmission parts are made of imported bearings and bearing, stable performance, long service life. 6, probe with short-term alarm function, use more safety. 7, the amount of soup the encoder, the amount of soup is more accurate. In the manual / automatic state can increase or decrease the amount of soup, soup is stable, reproducible. Greatly reduce the defective rate of the product. 8, can be single, but also with spray casting machine, removing machine line, become fully automated equipment. 9, the standby mode, and then the complex even if mold loose heart can mix freely. Manual / automatic two kinds of mode of operation, three standby mode standby standby after and before, and linkage control.
The advantages of the encoder control:
1, more convenient adjustment, adjust the position no longer using special tool, adjust directly on the touch screen. 2, higher reliability, stability, encoder belongs to non-contact, improve the reliability and stability of the system. 3, the digital implementation of - adjust the machine realizes digital. 4, longer service life. Main configuration: Ø vertical gapless gear - Taiwan CPG Ø proximity switches - South Korea AUTONICS Ø worm - Taiwan Cheng Ø encoder - Japan KOYO Ø bearings -- Japan NSK Ø security door switch - Japan OMRON Ø heat induction line - Taiwan - Taiwan KMC Ø Ø chain sprocket - Taiwan KMC Ø insulating porcelain pieces - Taiwan high hardness high temperature resistant, including screw - Taiwan Jinyi 12.9 technical parameters:
Specifications / 1# 2# 3# 4# 5# 6# type 7#
Application of 125-200T 250-350T 400-500T 630-800T 1000-1250T die casting machine 1600-2000T 2500-3000T
0.5-2.0KG 1.0-3.5KG 1.5-6.0KG 2.5-8.0KG to the soup 6.0-15KG 18-25KG 20-40KG
The accuracy of +/-2% +/-2% +/-2% +/-2% to the soup +/-2% +/-2% +/-2%
0.5-2.5KG 1.0-4.5KG 1.5-6.0KG 2.5-8.0KG 6.0-15KG 18-25KG spoon of 20-40KG
Crucible diameter 450mm 500mm 550mm 600mm 800mm 850mm 900mm
Furnace wall thickness of 300mm 300mm 300mm 350mm 350mm 400mm 400mm
Crucible depth ≥ 400mm ≥ 500mm ≥ 500mm ≥ 580mm ≥ 600mm ≥ 750mm ≥ 800mm
The power of three-phase 380V three-phase 380V three-phase 380V three-phase 380V three-phase 380V three-phase 380V three-phase 380V
The power supply capacity of 1.0KVA 1.0KVA 1.5KVA 2.0KVA 3.0KVA 5KVA 5KVA
DC24V DC24V DC24V DC24V DC24V operating power supply of DC24V DC24V
0.2KW 0.2KW 0.4KW 0.4KW 0.75KW spoon motor 1.5KW 1.5KW
0.75KW 0.75KW 0.75KW 1.5KW motor soup arm of 2.2KW 3.7KW 3.7KW
A soup soup time 5sec 5sec 6sec 6sec injection 10sec 12sec 12sec
