Home > Products > Construction & Decoration > Building Coating

Flexible K11 waterproof coating 1Flexible K11 waterproof coating 2
  • Flexible K11 waterproof coating 1
  • Flexible K11 waterproof coating 2

Flexible K11 waterproof coating

Model:K11
Brand:kavco
Origin:Made In China
Category:Construction & Decoration / Building Coating
Label:Flexible waterproof , Universal waterproof , water resistant pain
Price: ¥1 / pc
Min. Order:10 pc
Inquire Now Add to Basket

Member Information

Detail

Kavco Building Materials Co., Ltd.

Free MemberGuang Dong - China
Live Chat:Last Online:25 May, 2013

Product Description

The product that
"High" flexible waterproof paint is a two-component, acrylic high polymer modified cement based waterproofing material. Composed of high-quality aggregate and selected additives in powder and liquid polymer additive, the powder mixed with additives, chemical reaction occurs, the formation of a layer of tough elastic waterproof membrane, the membrane has good adhesion to concrete and mortar, which can form a strong permanent combination with, prevent water infiltration.
Product features
1, has good flexibility, micro cracks can adapt to a certain degree of building structure vibration and various causes.
2, viscosity, and is able to loose bottom material, special-shaped parts and precast joint closure.
3, can the construction in the moist surface.
4, waterproof layer can be directly Putie tiles and paint, waterproof layer of high abrasion resistance.
5, good ventilation, keep the body dry.
6, non-toxic, harmless, environmental protection product. Can be directly used for drinking water pools and ponds.
7, for upstream and the negative side water proofing.
The main performance index
Executive standard: Q/SY YHF 012-2008
The sequence number technique index
1 solid content,% ≥ 80
2 drying time, H ≤ 2 ≤ 6 dry work
3 and concrete bonding strength, Mpa ≥ 1
4 impermeability, Mpa ≥ 0.6
Applicable scope
1, interior and exterior wall waterproof, moisture-proof.
2, building, bridge, underground room, kitchen, bathroom, (edible) pool waterproof engineering.
3, there may be a slight vibration, displacement, fracture structure, around the nozzle, post-pouring belt interface, the joint or joints, waterproof.
Base surface
1, should be solid, smooth, the surface must be clean, no dust, greasy, exfoliation, stripping agent, and other detritus, pipe root two junction, should be made of the arc.
2, obvious pores, trachoma can be used powder add water or cement mortar mix into the wet paste, erase.
3, a moist substrate to no water shall prevail; new concrete curing time should have certain, prevent concrete may dry shrinkage effect; old concrete surface must be clean water, dried and then painted.
Construction technology
1, the slurry into the mixing bucket, the hand blender stirring the powder added, mixing bucket, and stir for 5 minutes at least, thoroughly mix slurry, is not.
2, use brush or rolling brush direct brushing the paint on the base surface, can not leak brush, in order to prevent the precipitation, should maintain intermittent mixing process.
3, through the first layer, must wait for base slightly dry (just not sticky) later painted a second layer, usually takes 1-2 hours, depending on the substrate temperature and density. For more than 24 hours or coating has been cured, you must use the clean water to fully wet.
The very next day 4, slurry coating, with a fine spray water or wet cloth covers the coating 2-3 days, such as long-term water tank should be the vacant two weeks after the water, hot or corrosive liquid pool is empty for three weeks.
The reference quantity
1, used for moisture-proof, brushing a layer, thickness of about 0.5 ~ 0.7mm, depending on the flatness of the surface, about 0.9 kilograms / square meters.
2, used for waterproof, painted with two layers, the thickness of 1 ~ 1.2mm, depending on the flatness of the surface, about 1.8 kilograms / square meters.
Note that
1, this product construction temperature of 5 ℃ ~ 40 ℃, should ensure that the product is completely covered the base construction, the waterproof layer is completely dry rear can do other jobs.
2, 24 hours after the completion of construction, measures should be taken to prevent people walk, rain, frost, the scorching sun exposure.
3, paint mixing should be used within 30 minutes.
Packaging, storage and transportation
Keep in a cool and dry place, unopened product shelf life of one year. Product packaging is divided into 42 kg, 20 kg suit suit, 10 kg and 5 kg suit suit four.

Product Image

Flexible K11 waterproof coating 1
Img 1
Flexible K11 waterproof coating 2
Img 2

Send Inquiry to this Member

Kavco Building Materials Co., Ltd.

Po Industrial Park Tianhe District Guangzhou City Guangdong Province.

Phone:
86-020-34392032
Fax:
86-020-34392032
Contact:
feirongchen (marketing manager)
Mobile:
13802978962

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Building Coating Made In China Products

,  

Building Coating China Suppliers and China Manufacturers