Home > Products > Security & Protection > Alarm

Specifications

1:Alarm and Conroller Telemetry RTU
2:GSM alarm and controller
3:Monitor 4 digital inputs
4:smoke detector alarm RTU

SMS control door open system gsm gprs RTU sms/call controller  

 

 

The Q26_RTU GSM/GPRS/EDGE Remote Monitoring& Remote Control System is a complete Remote Telemetry unit. It contains a GSM/GPRS/EDGE Modem and control circuitry. It is capable of controlling up to 2 Relay outputs and monitor 2 Digital inputs and 2 Analogue inputs.(Analogue input support: Detect Water leaks. Monitoring Temperatures for out-of-range conditions, Monitor Humidity for Damaging High Humidity Levels and monitor fuel levels).

  

The Q26_RTU GSM/GPRS/EDGE Remote Monitor &Remote Control System is operated by the sending of SMS and GPRS/EDGE. The GSM/GPRS/EDGE controller
can be used as a remote telemetry system; users can directly control the output relays from a simple text message or GPRS. The controller can also be used as a
remote monitoring system; the unit can automatically notify the user whenever the any inputs change state and inputs counter.
The Q26_RTU is complete with extend function include DI/DO/AI by UART2, support back up battery and built-in Quad-Band Modem -900/1800/850/1900.

 

  

Features

 

1	Monitors up to 2 Digital inputs&2 Analogue inputs
2	2 Remote control outputs for switching applications
3	Fast and easy installation
4	Low set up and running costs
5	No field programming required as it can be done by SMS
6	Able to work in GMS mode/GPRS mode/EDGE mode
7	Works with 4 - 20mA(default)/1-5V based transducer
8	Accept other kind of transducer - temperature /motion transducer etc.
9	Reports on set point alarms and other triggers
10	Up to 10 alarm time set point
11	Support for get GPS location
12	Programmable low/high alarm points for each analogue input

 

  

Shopping Guide:

Warranty :One year

After -sell service : technician support

Packing :white paper box

Standard package : power supplier x 1 ,RS232 cable x1 .GSM antenna x1 .connecting port x1

Option :GPS antenna Internal .Gps Module .Internal battery . Temperature sensor .humidity sensor .smoke sensor .Led Screen ,gas sensor (payment another)

 

 

 Pictures show 

 

Interface

 

 

 

 

 

 

Power:  12V (12V-35V)

 

       Correspond Relay Specification

 

Communicate:   485/232 (Factory Default: 232)

 

              485:       (A   B)

 

              232:       (RX1       TX1        GND)

 

Digital Input:

 

              DI1:        (DI1+     DI1-)

 

              DI2:        (DI2+     DI2-)

 

Digital Output:

 

              DO1:      (DO1+    DO1-)

 

              DO2:      (DO2+    DO2-)

 

Analog Input:     Transmitter (temperature /water level / humidity/ pressure)

 

              Type:     Current (4-20mA)

 

              AI1:        (AI1+      AI1-)

 

              AI2:        (AI2+      AI2-)

 

Indicator Light:

 

              GSM:     Device Register State

 

              ACT:      Reserve for customized

 

              NET:      Reserve for customized

 

              GPS:      Reserve for customized

 

SIM Card:     3V/1V8

 

 

 

Access Equipment:   Serial Port Equipment (Camera /PLC….)

 

              Reserve for customized

 

 

 

 

 

 

Standard packing :

 

Equipment Size :13.2cm*7.3cm*2.8cm

 

Package size : 27cm*21cm*6cm

 

Weight package : 0.63KG

 

 

 

 

 

 

 

Configuration software:

 

 

 

 

 

  Application

 

1) SMS/MMS/Voice solutions Remote data transmit
2) POS Machine Recharging system
3) Vending machine Power/Oil/Gas system
4) Remote LED system Environmental detection
5) IPC system Remote meter reading
6) Remote controlling system
7) Singlechip remote data communication system
8)temperature sensor
9)Environmental monitoring
10)industrial water pressure monitoring
11)pressure monitoring