Home > Products > Industrial Supplies > Other Industrial Supplies

Equipment capacity (with cold-rolled steel sheet as an example):

Project front slices

Coil weight 25 tons 25 tons

Roll width of 550 ~ 1850mm and narrow 25mm

Steel thickness 0.3 ~ 4.0mm, 0.3 ~ 4.0mm

Steel coil diameter φ 508/610mm φ 508

Steel coil diameter φ 800 ～ 2100mm φ 2100mm (ma

The thickness of the steel plate is divided into a number of notes

1 the following 30

1.624

2.019

2.314

3.08

Unit speed:

The highest shear velocity: 150m/min.200m/min optional

Through plate speed: 15m/min

Product accuracy: Project tolerance range note

Width tolerance of ± 0.05mm width below 100mm

± 0.1mm width 100mm above

Burr 1/25 plate thickness below 0.8

1/20 plate thickness below 3

1/30 plate thickness and thickness below 0.5 new knife

Snake 1.0mm/2m

Coiling Cuoceng ≤ 1.0mm

Telescope ≤ 2.0mm

The ability of automation:

Memo

Automatic feeding and automatic height centering, automatic width of decoiler center, automatic adjustment, accurate, safe and reliable, simple operation.

Automatic coil diameter calculation automatic uncoiling, feeding guide plate automatically rise, extend, automatic will head into the pinch roll, accurate calculation, easy operation.

Automatic plate automatic plate width calculation, the side guide automatic positioning, NO.1 automatic loop formation, simple operation, safe and reliable, high efficiency.

The path automatic processing volume automatic feed path, safe and reliable.

Tail automatic processing volume automatic feed tail, NO.1 loop feed automatic processing, safe and reliable, high efficiency.

Fixed length automatic processing cutting length cutting length automatic calculation, automatic processing system matching set length and cutting length, safe and reliable.

Automatic center uncoiler adjustment automatic feed use.

Automatic positioning side guide roller automatic plate when using.

The velocity matching production line linkage operation of the production line, automatic cutting, open-book section tension stability, surface without additional defects, high efficiency.

Preparation of automatic selection of bilateral displacement type preparation stage, the system has the function of.

The knife automatic exchange with double knife seat, with the function of the system.

One arm / cross arm automatic positioning coiling section is equipped with a cross or a material collecting arm receiving arm, with the function of the system.

Coiling separator automatically slow rise and coiling separator with the receiving coil diameter changes, automatic slow rise.

Waste automatic tension machine automatic production, waste machine winding tension automatically according to the elastic edge wire of automatic adjustment.