Model: | GC12 |
---|---|
Brand: | Goodcrete |
Origin: | Made In China |
Category: | Construction & Decoration / Waterproof Materials |
Label: | Nano Waterproofing , Concrewaterproofing , Liquidwaterproofing |
Price: |
US $3.5
/ kg
|
Min. Order: | 1080 kg |
Live Chat: | Last Online:30 Mar, 2017 |
Nano Liquid Concrete Waterproofing, China Manufacturer
Professional Manufacturer, Core Technology!
First Class Quality, but Competitive Price!
Provide OEM service!
Introduction:
Goodcrete Deep Penetrating Sealer(DPS) is a water-based, inorganic, permanent waterproofing and protective agent forconcrete construction. It is environment friendly, colorless, odorless, non-toxic, non-flammable, free of VOC, easy and safe to use.Beside durablewaterproof and anti-seepage functions, it also can give the concrete construction comprehensive improvement andprotection, such as self-sealing, hardening, cracking resisting, anti-corrosion, anti-efflorescence, anti-chloride, etc.
Product Data:
Working Principle:
The inner alkali content of the concrete is about 360 times more thanthe surface’s, through the pores, DPS penetrates into the concrete structures, chemically reacts with the free alkalispresented in the concrete and forms silicate gel, which seals the micro cracks and capillary pores becomes the integral partof the concrete, strengthens the concrete structure, and blocks the harmful substances ingress; when water losses, it partlysolidifies into crystalline powder, let the concrete breathe freely, when meets with moisture or water, this reaction repeatsagain, thus, gives the concrete permanent waterproofing and protection, such as sealing, waterproofing, anti-permeating,hardening, dust-proofing, anti-corrosion etc.
(Crystals that generated from the crystallization test of DPS and baking Soda)
Characteristics and Functions:
01. Permanent waterproofing, moisture-proofing and anti-seepage;
02. Reinforces the density and hardness of concrete;
03. Reduces dusting, efflorescence, cracking and damage of freeze/thaw cycles;
04. Self-seals hairline cracks <<0.3mm repeatedly;
05. Resists the corrosion of chloride, UV, chemicals and salts;
06. Discourages the growth of bacteria, mold and microorganism;
07. Prolongs the service life of paint and concrete buildings.
08. Not changes the color and structure of the substrate.
10. Non-toxic, absolutely environment friendly.
11. Easy and fast to use, spray, brush or roll evenly on the surface.
12. Rigid waterproofing, doesn’t need screed-coat and protective coat;
13. Inorganic products, permanent functions.
(Full set of test report)
Recommended Applications:
Waterproofing Moisture-proofing Anti-permeating |
Basement, subway, sewage treatment plant, dam,reservoir,variouspools, dock, green roof, grain depot, warehouse, civil air defenseconstruction, floor’s waterproof layer, etc. |
Dust-proofing Anti-microorganism Anti-pollution |
Clean workshop, winery, food factory, grain depot, ancientarchitectures, etc. |
Anti-acid/alkali/salt |
Chemical plant, waste yard, power plant etc. |
Structure Reinforcement Anti-cracking Reduce freeze/thaw damage Prolong service life |
Bridge and culvert, airport runway, parking lot, tunnel, etc. |
Improve adhesion Prevent finish coating peel off |
Concrete cracks/damage repair; As primer coating of finish coating, etc. |
How to use:
01. Equipment: Broom, respirator, low pressure sprayer (or brush, roller), gloves, work clothes and boots, etc.
02. Visible cracks≥0.3mm, should be repaired first.
03. Thoroughly clean up the surface, thoroughly remove contamination, laitance, oil, film and coating toensure the DPS can efficiently penetrate into the surface..
04. The surface should be dry or semi-wet.
05. Shake well before using.
06. Spray the DPS evenly and saturatedly on the clean concrete surface, the areas become dry too quickly,immediately spray again.
07. Coverage: 3-5 m2/kg(2 times spraying), the higher the substrate density, the less spraying quantity.
08. Air temperature 5-35℃, surface temperature 2-33℃,relativehumidity10-90% is the best.
09. When the whole surface become semi-wet after the 1sttime spraying, spray DPS for the 2ndtime.
10. Avoid the surface suffering from water and rain within 24h after construction, and after 3-7days, thetreated surface can be started following works.
Packing:20KG/ Pail, 220KG/Pail i.e. 5 US Gal/Pail, 55 US Gal/Pail(HDPE Pail)
Available Product Documents:
01. Product Data Sheet.
02. MSDS
03. Test Reports
04. Construction Guideline
05. Company Brochure
06. Powerpoint(PPT)
07. Free sample