Home > Products > Industrial Supplies > Machinery > Heat Exchange & Air Conditioners

Flooded Type Water Cooled  Screw Chiller 1
  • Flooded Type Water Cooled  Screw Chiller 1

Flooded Type Water Cooled Screw Chiller

Model:HWFS
Brand:HAMMER
Origin:Made In China
Category:Industrial Supplies / Machinery / Heat Exchange & Air Conditioners
Label:water cooled chiller , screw chiller , flooded type chiller
Price: -
Min. Order:1 pc
Inquire Now Add to Basket

Member Information

Detail

Product Description

HWFS   Flooded Type Water Cooled Screw Chiller

 

Flooded Water Cooled Chiller

 

 

 

We are manufacturer producing fan coil unit(fan coils)/air handling unit(ahu)/chiller

 

1)R22:368-3035kw  R134a:363-1956kw
2)compressor:1/2/3  system:single/double/three  Fushen compressor

3)evaporator: flooded type

4) separator :high efficiency separator for chiller

5)valve: electronic expansion valve

6)Siemens PLC for standard chiller unit

 

 
5)Chiller Compressor:
Double screw compressor( modified according to our design requirement 
1Enlarge outlet size,reduce pressure drop,increase efficiency
2Modify capacity ratio  different capacity ratio will be choosen according to different working conditioning
3enlarge rotor discharge outlet volume to increase the efficience
4high quality oil separator design
5check valve optimization design ,pressure drop less than0.02kg/c
 
Adopted in single compressor 30RT300RT,which is adopted in air conditioner,  industry etc
 
6)Chiller  Flooded type evaporator
  working theoryadopting big vessel boiling heat transfer theory, chilled tube is totally immersed in liquid refrigerant , the heat of the water inside the tube will be removed by the refrigerant  through heat transfer to make it cool
1.Refrigerant is under boiling situation, water flow is in  turbulenc which increase heat transfer efficiency. Superheat of outlet referigerant is around 2~3 , water flows into the cooper tube which is easily cleaned
 
2. Comparing with falling film exchanger , the constructure is more simple and the heat transfer efficiency is close. Comparing with dry type evaporator, the heat transer efficiency is high. 
 
7)Chiller Oil Separator
Self developped high efficient oil separatorto ensure 3ppm return which has been adopted in Hefei General constitute and fushen test equipment
 
8)Chiller Electronice expansion valvesuction gas over heat control
Gas suction overheat control system is combined by electronic expansion valve, pressure sensor, temperature sensor and controller. P1 of the evaporator outlet is transferred to controller through pressure sensor and overheat is transferred to controller through temperature sensor,after controller handling the signal, it will output the instruction to stepping motor of the electronic expansion valve, then the valve will be opened to the position needed to guarantte the liquid requirment of the evaporator. No matter under any situation like standard ,varialbe working condition or full load,the high COP will be achieved
 
9)chiller Injection Pump
a)Compact design and simple constructure
 
b)Efficiency   above90
 
c)Oil return effect achieved with less power consumption
 
d)No moving parts ensures reliable performance
 
e)Comparing with other factories, oil return is 15% higher
 
 
10)Chiller PLC controller
Compressor coil overheat temp protect and overload protect
Engine oil preheat time on/off
Water flow swtich interlock
Chilled water supply overlow temp protect
Gas discharge over high temp protect
Power failure memory
Frequently on/off protect
Abnormal voltage protect
Oil level over low protect
High/low pressure protect
 
 
 
Auto anti freezing monitor after duty off and seamless exchange with normal condition
Compressor capacity regulating on chilled water temperature basis
On/off according to load 
With remote control RS-485RS232        standard interface
Doube compressor working in turn
Running time limitation
running time accumulation
Time on/off
self diagnostic
alarm  
Set point can be modifed  
Running with LED
Gas discharge temp 
Ambient temperature, outlet/inlet water temp  
 
Chiller function
1.  Multiple function
  can be used for air conditioning, ice maker n and supplying hot water for live to increase the usage
 
2. High outlet water temp
   2 types heat recovery standard  R22,
   Max. water suppl temp 55the other type is high water supply temp R134a ,high efficiency and max water supply temp  65
 
4. Self produced evaporator and condensor .
 
5. specialized design flooded water chiller compressor
 
6.high efficient oil separator which no needs complicated oil pump system and changeable oil filter mounted inside .
 
7. humanization touch screen
 

Product Image

Flooded Type Water Cooled  Screw Chiller 1
Img 1

Send Inquiry to this Member

Wuxi Hammer Air Conditioning And Ventilation Equipment Co., Ltd.

Room 1918, Haibo Tower, No. 101, Nanmatou Rd., Pudong New Area

Phone:
0086-21-61009451
Fax:
0086-21-61009452
Contact:
Cathy Wu (sales person)
Mobile:
18662026776

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Heat Exchange & Air Conditioners Made In China Products

,  

Heat Exchange & Air Conditioners China Suppliers and China Manufacturers