Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

 MA5683T

SmartAX MA5683T is the global first all-in-one access platform which can provide DSL and optical integrated access. It can provide high density ADSL2+, VDSL2, POTS, ISDN, PON and Ethernet fiber P2P access, triple-play service, and TDM/ATM/Ethernet leased line services for business customers.

The MA5680T can also offer mobile backhaul with high reliability and high precision clock, and high density GE/10GE interfaces for cascading remote access equipments. MA5680T helps to simplify network architecture, to enable seamless migration in FTTx network and lower TCO essentially. 

Features
Any Access
Support multiple access methods, VDSL2/ADSL2+/G.SHDSL/POTS/ISDN/ PON/Ethernet P2P;
Support multiple scenarios: FTTC / FTTB / FTTH / FTTO / FTTM.

Any Service
Large capacity IPTV service provision, 8K multicast users and 4K multicast channels;
H-QoS support 3-level QoS (Different ISP/service/user) guaranteeing OLT wholesale;
Traditional E1 service access, NATIVE TDM or CESoP for traditional E1 service of enterprise and mobile backhaul;
E2E high reliability guarantee for business and mobile backhaul, BFD/LAG/Smart Link for uplink redundancy and 50ms switching time of Type B for fiber protection;
Support local traffic self-switching, which meets the requirements of enterprise and campus network.

Access and Aggregation Integrated
Large aggregation capacity, 3.2T bit/s backplane capacity,960G bit/s switch capacity, 512K MAC addresses;
High density GE/10GE interfaces for cascading, up to 36*10GE or 140*GE interfaces, no need for additional investment of aggregation switches;
High reliability networking support direct connection to the BRAS, and hitless software upgrade function.

Unique ATM DSLAM Cascading
Cascade ATM DSLAM with ATM STM-1 interfaces;
Reduce OPEX by reusing ATM DSLAM and removing ATM aggregation network.

Green
First company that complies to COC standard, average DSL port power consumption is 10% less than industry;
The maximum power consumption of the 8-port GPON line card is only 55W, which is 30% less than industry.

Unified fiber/copper platform, maximizes network resource value;
Lower investment risk in network transformation with equipment reuse: FTTE, FTTC, FTTB, FTTH or mix.

Full Service Access, Increase Revenue
Unified access for resident, business and mobile backhaul, reduce network equipment and TCO;
Enriched experience, reduce churn and increase ARPU.

Service Bboards

H805GPBD Board
H805GPBD is a 8-port GPON OLT Interface Board. It works with the optical network terminal (ONT) to provide GPON access service.
The H805GPBD board supports the following functions:

• Eight GPON SFP ports
• A maximum of 1:128 split ratio
• Class B+ and Class C+ optical modules
• Received signal strength indicator (RSSI) detection and controlled optical signal transmission of the optical module
• ONU-based shaping
• Optical performance monitor (OPM)
• Automatic power shutdown in case of a high temperature

Control Boards
H801SCUN Board
The H801SCUN board is a Super Control Unit Board. It is the core of the system control and service switching and aggregation. The H801SCUN board can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801SCUN board configures, manages, and controls the device, and also implements the simple route protocol functions.
The H801SCUN board supports the following functions:

• System control and management unit
• Local and remote maintenance
• Active/standby switchover
• Load balancing
• GE or 10GE channel to the service board
• Environmental monitoring parameters
• Four SFP GE ports for upstream transmission or cascading

Upstream Interface Boards
H801GICF Board
The H801GICF board is a 2-port GE Optical Interface Card, providing upstream or cascading optical ports.
The H801GICF board supports the following functions:

• Upstream transmission or cascading
• Two SFP GE ports

Power Boards
H801PRTE Board
The H801PRTE is a Connect Power Board. It leads in the -48 V DC power supply for the device.
The H801PRTE board supports the following functions:

• One -48 V power input
• Filtering and current-limiting for the power input port
• Under-voltage detection, detection of whether the input power exists, and fault detection
• Combined reporting of the protection alarm and board online signal
• ALARM indicator