Home > Products > Electronics & Electricity > Electronic Instrument > Laboratory Instrument

Q1-Test cyclic corrosion testing simulates the closet actual natural environment, such as salt spray, drying, humidity and temperature alternating. The testing is strict than natural environment, and can be programmed or tested individually.

Q1-Test QCC-510 Features:

1, Powerful LCD touch screen temperature and humidity controller

2, Optional recorder used to save temperature and humidity curve graph

3, Programmable control system, continuously and cyclic spray

4, Support power off memory, available to continue testing after power recovery

5, Auto or manual water refilling system makes sure non-stopping testing

6, Precision glass nozzle makes sure fog diffuses well-distributed

7, Auto descending and ascending system for testing cover, makes operation easy and safe

8, Clearly observe testing samples with auto defrost system

Q1-Test QCC-510 Control System:

1, High precision P.I.D. temperature controller to limit the temperature differences

2, Optional continuously or cyclic spray, apply fully automatic detecting system

3, Double over-heating protection systems protect both of chamber and operator.

4, Optional RS232 interface used to connect with computer

Q1-Test QCC-510 Testing standards:

1, ASTM B117 Standard Practice for Operating Salt Spray Apparatus

2, ASTM B368-97 Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

3, ASTM B380-97(2007) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

4, ASTM D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

5, ASTM G85 - 11 Standard Practice for Modified Salt Spray (Fog) Testing

6, SGM-GM4465P Water Fog Humidity Test

7, ISO7253:2001 Paints and varnishes – Determination of resistance to neutral salt spray (fog)

8, ISO9227-2012 Corrosion tests in artificial atmospheres – salt spray tests

9, DIN 50021: Salt spray testing

10, JIS Z2371 Methods of Salt Spray Testing

Q1-Test QCC-510 Specifications:

Environment Temp. and Humid. Range: +5℃~ +35℃ / <85%RH

Air pressure: 86~ 106Kpa

Testing Temperature: NSS ACSS 35℃±1℃; CASS 50℃±1℃

Pressure Barrel Temperature: NSS ACSS) 47℃±1℃; CASS 63℃±1℃

Drying Test: Chamber temperature at 40℃-70℃( ±0.5℃); Humidity at 30%-98% (±5%RH)

Temperature and Humidity Test: Chamber temperature range is RT℃-70℃(±2℃) (Low temperature: below 25℃ without humidity)

Cooling Time: -70℃～RT℃ within 35min

Heating Time: RT-50℃ within 60 min

Temperature Uniformity: ±2℃

Humidity Range: 30%-98% (uniformity: ±2%RH)

Solution Consistence: NaCi 5%

Specifications：

Note:

1. The above specifications are for reference only, the actual specifications for the main quotation.

2. Custom made is available according to customers’ special requirements