Home > Products > Industrial Supplies > Mining Machine

Descriptions
Jiangxi Well-tech International Mining Equipment Co.,Ltd. saw-tooth wave jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional sine wave jig. The difference between saw-tooth wave jig and sine wave jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under-size fraction.

Industrial tests carried Jiangxi Well-tech International Mining Equipment Co.,Ltd. of saw-tooth wave jig and sine wave jig for comparison showed that the recovery rate for operation of saw-tooth wave jig is raised by Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% than traditional jig. The area reduces 1/3 and the stroke is adjustable.

Feature
1 High capacity
2 High concentration ratio and high recovery
3 Easy to install, operate and maintain
4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
5 Saving water 30-40% than ordinary jig
6 The pulsation speed very easy adjusted by regulator
7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc

Main Technical Parameters