Model: | SW-GSM-1S-C |
---|---|
Brand: | SW360 |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | Selective booster , Selective repeat , Selective GSM |
Price: |
-
|
Min. Order: | 5 pc |
Live Chat: | Last Online:05 Mar, 2014 |
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Introduction To Mobile Phone Signal Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
3. ReduceCellphone Radiation |
4. Protract Cellular Battery Life |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
2. Features |
High gain, easy installation and operation. |
Full-duplex, single-port design, build-in power supply. |
Use ALC technology, adjust extent automatically |
LED Light Working & Signal Condition Indicators |
Big linear power, control intermodulation & scatteration stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
|
SPECIFICATIONS |
Specification |
||
Frequency Range (Customers to Choose) |
Uplink |
898~907.4 MHz |
|
Downlink |
943~952.4 MHz |
||
Frequency Bandwidth (3dB Bandwidth) |
9.4MHz |
||
Gain |
≥ 65dB |
||
Automatic gain control (Step Attenuation) |
31dB @ 1dB/ Step |
||
Auto Gain Control |
20dB Min. |
||
Output Power(Customers to Choose) |
|
||
Spurious Emission |
≤ -15dBm/30kHz |
||
9kHz~1GHz: ≤ -36dBm/30kHz |
|||
1GHz~12.75GHz: ≤ -30dBm/30kHz |
|||
Out-of-Band Gain |
2.7 ≤ f offset < 3.5 MHz |
≤ 60dB |
|
3.5 ≤ f offset < 7.5 MHz |
≤ 45dB |
||
7.5 ≤ f offset < 12.5 MHz |
≤ 45dB |
||
12.5 ≤ f offset |
≤ 30dB |
||
Inter-Modulation Attenuation ACPR |
≤ -40dBc / 30kHz (measured under rated output power) |
||
In-band Ripple |
≤ 4dB |
||
Voltage Standing Wave Ratio |
<=1.5 |
||
I/O Impedance |
50 Ω |
||
Noise Figure |
≤ 5dB |
||
System Delay |
≤ 5μs |
||
RF Connector(Customers to Choose) |
N-Type (Female) |
||
Operating Temperature |
Operation: - 10°C ~ + 55°C / Storage: -20°C ~ +60°C |
||
Power Supply |
AC 220V±20%, 50/60Hz(AC 220V/ DC5V/3A power adapter) |
||
Dimensions |
175*105*37(mm) |
||
Weight |
≤ 3 kg |
||
Alarm Monitoring System |
Alarm for uplink self-oscillation |
||
Indication LED |
Power supply, Run, Alarm |
Installation Approaches
Technique Supporting
Accessories
SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc
Payment Terms: | TT / WESTERN UNION / MONEYGRAM |
---|---|
Packing: | Netural Packing |
Lead Time: | 1-3 working time for sample |
custom_attr1: | GSM Band Selective repeaters |