Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Optical Fiber

MU/PC single-mode single core optical fiber jumpers, MU/PC SM SX single-mode single core optical fiber jumpers
LC - SC single-mode | multimode optical fiber jumpers, LC - SC jumper wire, single mode | multimode jumpers, money fiber jumper wire physical/electrical properties:
1. The inner cover diameter: 125 μ m.
2. Core diameter: 50/62.5 μ m (multimode); 9 μ m (single mode).
3. Tensile strength: 15 KGF (phi 0.9 mm fiber except).
4. Fiber diameter: 3 mm / 2 mm.
5. Minimum bending radius: 10 by cable diameter.
6. Working temperature: - 40 ℃ - + 75 ℃.
7. Storage temperature: - 50 ℃ - + 85 ℃.
8. Repeat plug number: 1000 times.
9. General single-mode jump line guarantee index: insertion loss acuities were 0.3 dB (APC/UPC); Return loss: or 50 db (UPC); Or 65 dB (APC)
10. MTRJ single-mode jump line guarantee index: insertion loss acuities were 0.75 dB; Return loss: or 40 dB.
11. General multimode jump line guarantee index: insertion loss acuities were 0.2 dB (PC); Acuities were 0.2 dB (UPC); Acuities were 0.3 dB (APC).
Return loss: or 45 dB (PC); Or 50 dB (UPC); Or 60 dB (APC).
12. MTRJ multimode jump line guarantee index: insertion loss acuities were 0.5 dB; Return loss or 40 dB.
13. Mechanical properties insertion loss biggest change: compatibility (arbitrary butt) : 0.2 dB. Repeatability (repeat plug 1000 times) : 0.2 dB. Tensile sex 0.2 dB (10 kg tensile / 3.0 mm cable). Vibration resistance: 0.2 dB (vibration: 10-58 hz; amplitude: 1.5 mm, 10 hz/minutes, 2 hours).
14. Environmental performance insertion loss biggest change: temperature cycle: 0.2 dB (40 - + 80 ℃ five cycle). High temperature test: 0.2 dB (high temperature: 85 ℃, 100 hours). Low temperature test: 0.2 dB (low temperature: - 40 ℃, 100 hours). Humidity test: 0.2 dB (65 ℃ and 93% relative humidity, 100 hours).
Money fiber jumper wire product features:
15. The smaller coaxiality error and inner hole diameter of high-precision ceramic plug core, provide additional insertion loss and return loss, avoid transmission performance decline and optical transceiver device damage.
16, USES the advanced grinding technology and grinding equipment, ensure that optical fiber circle grinding offset, optical fiber sag and ceramic face radius of curvature and other technical parameters which conform to the standard.
17. The company to ensure the long-term use of connector, not only to joint on attenuation and back reflection test, and the precision interferometer test joint surface scratch or defects, acquisition, ST FC, SC, LC and MU type joint by the curvature of the half, grinding offset, optical fiber sag quantity and outstanding quantity, to ensure that the joint quality.
18. 100% of all optical detection, each jump line all ensure that there is good grinding quality and excellent performance index.
19. According to the customer's demand for single core configuration, double core or more core and so on the different fiber core type. Optical fiber products and PVC and LSOH different fire rating, provide the design flexibility.
20 low insertion loss and return loss is big, exchange performance, repeat plug good performance, easy to use.
21 accord with ANSI/TIA/EIA and ISO/IEC for durability, moistureproof, coupling stress, optical fiber tensile force and the damp, extreme temperature, insertion force and cable tension stress, the impact and vibration, severe environment to adapt to the requirements of the ability.
22 environment characteristics stability, environmental test through the Telcordia standard.
For details, please add QQ1011068558