Home > Products > Transportation > Car Accessories > Auto Maintenance

Adaptors cables for FIAT ECU Scan Fiatecuscan

wholesale Adapter Cables for ECU Fiatecu Scan fiatecuscan diagnostic scan
Adapter cables for FiatECU scan diagnostic cables in wholesale factory direct:

Three ODB cable adapters to allow additional diagnostic options for Italian cars. These include ENIGINE, ABS, POWER STEERING and CAN ECU's.

Specification:
Green Adaptor Lead (FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering
Red Adaptor Lead (FiatEcuScan Adaptor 2) = Airbag
Yellow Adaptor Lead (FiatEcuScan Adaptor 3) = CAN

Pin Configurations:
Green Adaptor Lead = Female pin 7 to male pins 1, 7, 9, 12.
Red Adaptor Lead = Female pin 7 to male pin 3
Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12

Additional Items Required:
This is for the three cable adaptors only.

You will also require:
An ELM327 or KKL diagnostic cable to connect to these adaptors.
FiatEcuScan software (free or full version).

Please see our website or contact our sales for a full list of supported vehicles.

Package include:
1 X FIAT diagnostic cable
 Fiatecuscan adaptors
1. Three cables
2. Yellow, red, green
3. Advanced fault diagnostics for FIAT & Alfa Romeo cars
4. Now includes 3 adaptor leads for even more coverage!

Our FiatECUScan package supports fault code reading (and clearing) and live sensor data from controllers such as Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.

Finally you can look after FIAT-based cars at home or in the workshop without needing to visit the dealer!

Coverage includes 1999 onwards petrol and diesel models (cars must have a 16-pin diagnostic socket fitted to be compatible with this package).

What is included in the package?
'Green' adaptor lead (FiatECUScan 'Adapter 1') - to allow ABS and Power Steering diagnostics.
This lead has a green connector on one end for easy identification.
- Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pins 1, 7, 9 & 12 on the car end of the adaptor.

'Red' adaptor lead (FiatECUScan 'Adapter 2') to allow Airbag diagnostics.
This lead has a red connector on one end for easy identification.
- Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 3 only on the car end of the adaptor.

'Yellow' adaptor lead (FiatECUScan 'Adapter 3') - to allow low speed CAN diagnostics (FIAT 500 etc).
This lead has a yellow connector on one end for easy identification.
- Pin 6 on the diagnostic tool end of the adaptor is electrically connected to pin 1 on the car end of the adaptor.
- Pin 14 on the diagnostic tool end of the adaptor is electrically connected to pin 9 on the car end of the adaptor.
- Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 12 on the car end of the adaptor.