| Model: | FW-006 |
|---|---|
| Brand: | FANWELL |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Antenna |
| Label: | gps gsm antenna , gps antenna gsm , combined antenna |
| Price: |
US $6.9
/ pc
|
| Min. Order: | 10000 pc |
| Live Chat: | Last Online:12 Jul, 2013 |
Electrical Characteristics
3.1 Dielectric Antenna
Form 1
|
No. |
Item |
Specifications |
Post Environmental Tolerance |
|
1 |
Center Frequency |
1575.42 MHz |
+-3 MHz |
|
2 |
Band Width |
+-5 MHz |
+-1 MHz |
|
3 |
V.S.W.R(in BW) |
1.5 /1 |
— |
|
4 |
Gain(Zenith) |
3 dB |
+-0.5 dB |
|
5 |
Polarization |
RHCP |
— |
|
6 |
Impedance |
50 |
— |
3.2 LNA/Filter
Form 2
|
No. |
Item |
Specifications |
Post Environmental Tolerance |
|
1 |
LNA Gain |
28+-2 dB |
+-2.5 dB |
|
2 |
Noise Figure |
1.5 dB |
— |
|
3 |
Filter Out Band Attenuation |
12dB Min f0+50MHz 16dB Min f0-50MHz |
+-1.0 dB |
|
4 |
DC Voltage |
2.2~5 V |
|
|
5 |
DC Current |
5~15 mA |
|
3.3 GSM Antenna
Form 3
|
No. |
Item |
Specifications |
|
1 |
Frequency |
824~960 MHz/1710~1990 MHz 1920~2170 MHz |
|
2 |
V.S.W.R(5m) |
2.0/1 |
|
3 |
Gain(Zenith) |
2 dBi |
|
4 |
Impedance |
50 |
3.4 Mechanical
Form 4
|
No. |
Item |
Specification |
|
1 |
Cable |
RG174/RG58 30CM |
|
2 |
Connector |
SMA |
|
3 |
Plastic Housing |
Black |
|
4 |
Mounting |
Screw |
4.Reliability
Condition Temperature: 40+-5 degree C
Load DC=5V+-0.5 V
Quantity 2000pcs
Sustained Time 480h
5.Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition Temperature range 25+- 3degree C
Relative Humidity range 55~75%RH
Operating Temperature range -40degree C~+85degree C
Storage Temperature range -40degree C~+100degree C
5.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40+-2degree Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
5.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
5.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
5.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80+-5degree C for 24+-2 hours and 1~2 hours recovery time under normal temperature.
5.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40degree C+-5degreee Cfor 24+-2 hours and to 2 hours recovery time under normal temperature.
5.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25degree C and high temperature +85degree C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
6.Weatherproof
Put the antennas in 1m deep water for 12h, and find 100% waterproof.
