| Model: | HD-90 |
|---|---|
| Brand: | Haida |
| Origin: | Made In China |
| Category: | Industrial Supplies / Electrical & Electronic Product Equipment |
| Label: | Test machine , test chamber , test equipment |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:18 Apr, 2013 |
Salt Spray Corrosion Testing Chamber
Product Description:
Salt spray corrosion testing chamber adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Technical Specifications:
Salt Spray Corrosion Testing Chamber
| Model | HD-90 |
| Inner Size (L×W×H) | 90×60×50 cm |
| Out Size(L×W×H) | 141×88×128 cm |
| Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
| Temperature Range | 35°C~55°C |
| Temperature Fluctuations | ≤±0.5°C |
| Temperature Uniformity | ≤±2°C |
| Temperature Precision | ±1°C |
| Test Chamber Temperature | Salt Spray Method (NSS) 35±1°C
Corrosion-resistant Testing Method (CASS)50±1°C |
| Saturated air Barrel Temperature | Salt Spray Method (NSS) 47±1°C
Corrosion-resistant Testing Method (CASS)63±1°C |
| Brine Temperature | 35°C±1°C |
| Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
| PH | Salt Spray Method (NSS 6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Lab Volume | 270L |
| Brine Tank Capacity | 25L |
| Power | AC220V, 50/60Hz, single phase |
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
| Accessories | Testing Salt/ Measuring tank/ Equipment each 1 set |
| Standard | CNS: 3627, 3385, 4159, 7669, 8886;
JIS: D0201, H8502, H8610, K5400, Z2371; ISO: 3768, 3769, 3770; ASTM: B117, B268 |
Design Criteria:
Salt Spray Corrosion Testing Chamber
1, ASTM B117: Standard Practice for Operating Salt Spray (Fog) Apparatus
2, ASTM B368: Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
3, ASTM D1735: Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
4, ASTM D2803: Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
5, ASTM D3451: Standard Guide for Testing Coating Powders and Powder Coatings
6, GM 4298: Salt Spray Test
7, GM 4465P: Water Fog Humidity Test
8, ISO 7253: Paints and Varnishes- Determination of resistance to neutral salt spray (fog)
9, ISO 9227: Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
10, SAE J1959: Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection
Maintenance Procedure
Salt Spray Corrosion Testing Chamber
1, Change the heat sink water if the test period over one month.
2, Don’t use the salt solution if unused for a week, avoid affecting the test quality.
3,Clean the inner of the chamber and release the water in heat sink if a longer time interval from the next test.
Release the water from heat sink---------------open the drain value
Release the water from isolation tank--------------- pulled up the middle silicone plug.
Release the water from preheat tank--------------- Pull out the internal silicone plug.
4, Ensure the test quality, please replace the glass nozzle periodically within 4500 hours.
