Product Description
RD Series:Analog output: 4~20mADC,0~10VDC
| Feature |
|
| Split design,small installing space. |
| External electronic head design,convenience to replace. |
| Absolute location output,no need to return to zero. |
| LED for sensor diagnostics |
| Internal measuring rod IP69 |
| The dimension of RD series sensor internal installed measuring rod head is only ￠26.9mm(diameter)*32mm(length),suited for the internal measuring occasion which is strict with installation space. |
| Parameter Measured |
| Measurement range |
25-2500mm |
| Output signal |
4~20mADC(min./max. load:0/500 Ohm) |
| 0~10VDC(min.loa t;5k Ohm) |
| Resolution |
Analog output 16 binary digit D/A |
| Nonlinearity degree |
<±0.01% F.S.(min.±50μm) |
| Repeatability precision |
<±0.002% F.S.(min.±2μm) |
| Refresh time |
>1kHz |
| Electric feature |
|
| Outgoing line |
Straight out of the cable,or 6 lamp pith aircraft connector |
| Input voltage |
24VDC(-15/+20%) |
| Working current |
<60mA(changing depend on F.S.) |
| Polarity protection |
max.-30VDC |
| Overvoltage protection |
max.36VDC |
| Insulating ability |
500V(between the signal GND and the housing) |
| Fault indication |
Red & green LED pilot lamp. |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
