|Brand:||Hong Ye silicone rubber|
|Origin:||Made In China|
|Category:||Chemicals / Rubber Materials|
|Label:||molding silicon rubb , RTV-2 silicone , liquid silicone|
|Min. Order:||200 kg|
Addition cured silicon rubber for silicon insoleApplications: silicon insole, Silicone Gel Toe Spreaders, Silicone Gel Arch Supports, Silicone Gel Metatarsal Pad, silicon pads, Silicone Gel Heel Cups
Addition cured silicon rubber for silicon insole Typical Datasheet :
Model: Q625# silicon rubber
Mixing Ratio: 1:1
Operating time (Mins 25°C): 30 -50
Curing time (H 25°C): 3 – 5
Curing time (Mins 60°C): 20 – 30
Hardness (A°): 25±2
Density ( g/cm 3 ): 1.08
Viscosity (CS) (After mixed): 8000 ± 500
Tensile-strength( kgf /cm2 ): 45 ± 5
Tear-strength (kgf /cm2: 14 ± 2
Elongation-break(%):450 ± 50
Addition cured silicon rubber for silicon insole Advantages:
1. High transparency.
2. High fluidity, high curing rate.
3. Pressure release.
4. Shock absorption.
5. Multiple density
Addition cured silicon rubber for silicon insole Points of attention:
1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.
2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.
3,Addition cure silicone affect by temperature greatly when cured under room temperature.
4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.
It’s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it’s easy to make the catalyst to be poisoning.
5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa
6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it’s 1 : 1.
Addition cured silicon rubber for silicon insolePackage and storage :
1. 20kg or 200kg /drum.
2. It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
Place of Origin Guangdong China
Brand Name: Hong Ye silicone rubber
Minimum Order Quantity: 200 Kilogram
Packaging Details: 20kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C,T/T
Supply Ability: 8000 kg/day
Further information, please feel free to contact Firleanna: