Product Description
CAS:9002-88-4
HDPE-High Density Polyethylene
Grade: Blow molding grade, injection molding grade, etc.
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.
Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
Property |
Unit |
Typical Value |
Mass density |
g/cm 3 |
0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) |
g/10min |
≤1.0 |
Tensile yield strength |
MPa |
≥19.0 |
Flexural modulus |
Mpa |
≥965 |
Elongation@ break |
% |
≥400 |
Impact Embrittlement temperature |
centidegree |
MAX -118 |
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
Volume resistivity |
OHM-CM |
MIN 1x10 15 |
Package: 25KG pp bag or as buyer's request
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,