Wholesale Network & Power 2 in 1 surge protector devices SPD
Product Description
Function: |
RJ45 / DC12 professional integrative network and power 2 in1 surge protector device.It is specially |
designed for surveilance system and network system. It can prevent the surge and static damage |
surveilance or network system and power. the maximum discharge current can achieve 10KA, reacting |
within nanoseconds, so it can fully protect high-levels and expensive surveillance and network equipments |
|
Feature: |
1. Adopt multilevel protection circuit, low-level persistent voltage. |
2. Adopt the famous German brand core components, installation and maintenance is easy. |
3. It has huge flow capacity, sensitive reaction. |
4. Excellent performance, and low-loss insert. |
|
Specification: |
Model |
RJ45/DC12 |
Power protection parameters
|
Nominal working voltage Un |
DC12V |
Maximum working voltage Uc |
DC20V |
Nominal flow-rate In (8/20uS) |
5KA |
Maximum flow-rate Imax (8/20uS) |
10KA |
Corresponsive time Ta |
1nS |
Joint form |
Press interface |
Network signal protection parameters
|
Continuous operating voltage Un |
5V |
Maximum working voltage Uc |
6V |
Nominal discharging current In (8/20us) |
5KA |
Maximum discharging current Imax (8/20us) |
10KA |
Insert loss Ae |
0.2dB |
Response time Ta |
1nS |
Joint form |
RJ45 |
Dimension |
108mm*66mm*29.5mm(does not include the joint and PE line) |
Working conditions |
Temperature -25—+65℃;Humidity≤95%(25-30℃) |
Test standard |
IEC61643-21:2000 |
|
Installation and Maintenance: |
1. First, link the power line with 4P socket (as the following picture), then plug in follow the arrow. |
2. The RJ45 socket is the signal input, connect it to the signal line, the common outlet of RJ45 is the signal |
output, it connects the protected equipment. Do not connect in the opposite direction |
3. Credibly connect the PE lines. This product need not pay special attention to maintenance, but please |
waterproof notice. When the system working goes wrong, please check the surge protector after |
removing it.If unused thesurge protector condition,but the system working normal, meaning the surge |
protector is damaged, please change the surge protector. |
Payment Terms: | T/T IN ADVANCE |
| |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,