Liquid Silicone Rubber (LSR) injection molding machine
Product Description
1. TYM series computer control system, multiple parameters adjustable.
2. Supersensitive displacement electronic ruler monitors the operation of every key action.
3. Direct pressure mould clamping, it can be divided into 6 sections of mould closing and 5 sections of mould opening.
4. It can remember thousands of sets of moulds parameter.
5. The raster monitors the mould closing interval.
6. It will use Taiwan LNC brand computer controller.
Horizontal LSR injection molding machine: the direct pressure mould clamping and injection can supply higher efficiency and better quality for producing the liquid silicone rubber products, usually is used for producing the liquid silicone products which hasn’t any insert, such as the baby nipple and keypad and so on.
THE LENGTH OF INJECTION PAIL mm
SHOT VOLUME(THEORETCAL) ml 120
IHJECTION RATE g/s 30
IHJECTION PRESSURE T 19.6
Nozzle Radius mm R19
CLAMPING UNIT
CLAMP FORCE T 95
OPENING STROKE mm 100-500mm
THE SPACE BETWEEN TIE-BARS mm 350×350
MIN. MOLDBOARD DISTANCE mm
EJECTOR STROKE mm 150
EJECTION FORCE T 7.8
OTHERS
PUMP PRESSURE Mpa 21
PUMP MOTR POWER kw 7.5
HEATING POWER kw 9
MACHINE DIMENSION(L×W×H) mm 5000×1200× 1580 (including the dosing unit)
MOULD ORIENTATION RING DIAMETER mm Φ100
THE SPECIFICATION OF THE DOSING UNIT kg 200kg/20kg
MACHINE WEIGHT T 3.0
Product Image
Img 1
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
