Flame Resistance Plastic Raw Material HDPE for HDPE Pipes
Product Description
Flame Resistance Plastic Raw Material HDPE for HDPE Pipes
1. Packaging & Delivery
Packaging Detail: 25kg/bag, kraft paper bags with plastic bags inside
Delivery Detail: 20 day after the deposite
2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE100/PE 80
Anti-flame,
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.
HDPE cable material Property |
Typical Value |
Mass density g/cm 3 |
0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg)g/10min |
≤1.0 |
Tensile yield strength MPa |
≥19.0 |
Flexural modulus Mpa |
≥965 |
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,