Advantages
Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
Large screen(128×64 dot matrix LCD), showing all functions and parameters.
Test at any angle, even upside down.
Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
Seven impact devices are available for special application. Automatically identify the type of impact devices.
Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.
Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
Battery information indicates the rest capacity of the battery and the charge status.
User calibration function.
Software to connect with PC via USB port.
With EL background light.
Thermal printer integrated, convenient for in field printing.
NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
Auto power off to save energy.
Outline dimensions：212mm×80mm×32mm.
Die cavity of molds
Bearings and other parts
Failure analysis of pressure vessel, steam generator and other equipment
Heavy work piece
The installed machinery and permanently assembled parts
Testing surface of a small hollow space
Material identification in the warehouse of metallic materials
Rapid testing in large range and multi-measuring areas for large-scale work piece
Technical Specifications
Measuring range：HLD（170～960）HLD
Measuring direction：360°
Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS
Display：dot matrix LCD，128×64 dots
Data memory： 500 groups max.（relative to impact times 32～1）
Printing paper: width is （57.5±0.5）mm, diameter is 30mm
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period：about 150 hours（With backlight off, no printing）
Communication interface：USB1.1
Configuration
Table 1-1
|
|
No.
|
Item
|
Quantity
|
Remarks
|
|
Standard Configuration
|
1
|
Main Unit
|
1
|
|
|
2
|
D type impact device
|
1
|
With cable
|
|
3
|
Standard test block
|
1
|
|
|
4
|
Cleaning brush (I)
|
1
|
|
|
5
|
Small support ring
|
1
|
|
|
6
|
Battery Charger
|
1
|
9V 500mA
|
|
7
|
Paper for printing
|
1
|
|
|
8
|
Manual
|
1
|
|
|
9
|
Instrument case
|
1
|
|
|
Optional Configuration
|
11
|
Cleaning brush (II)
|
1
|
For use with G type impact device
|
|
12
|
Other type of impact devices and support rings
|
|
Refer to Table 3 and Table 4 in the appendix.
|
|
13
|
DataPro software
|
1
|
|
|
14
|
Communication cable
|
1
|
|
|
15
|
|
|
|
|
16
|
|
|
|
