| Model: | jcx-1200-1050 |
|---|---|
| Brand: | JCX |
| Origin: | Made In China |
| Category: | Industrial Supplies / Construction Machine |
| Label: | roof tile machine , rolling machine , forming machine |
| Price: |
US $11000
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:21 Jun, 2017 |
color coated steel roof and wall panel forming machine
Manual decoiler---feed with guide---roll forming---press step---cut with fixed length---output with table
Technical Specification
(1) Manual decoiler
Un-powered; single head;
max.capacity: 5000kg;
Coil inner-diameter: 508mm
(2) Roll-Forming M/C:
Steps:13 Roller Material: 45# steel
Voltage:380V/50Hz. line speed:3-6m/min;
Rolling chromium thickness:0.05 mm
(3) Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.
Stop to cut , Post cut cutting length tolerance: ±2mm
Cutting tool material: GCr12 with quenched treatment 60-62°C
(4) Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 3kw Hydraulic oil :40#
(5)Computer control cabinet :
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted
Computed mode has two modes: automatic and manual one.
(6)Counter :
One counter gauges length, pulses, and decides length
(7) Output table
It used to load the forming plate
color steel roll forming machine|
Main parameters of the machine |
|
|
1.suitable material to process: |
|
|
color steel or galvanized sheet |
|
|
2.Thickness of the plate: |
0.4-0.8mm |
|
3.Effective width: |
900mm |
|
4.coil width |
1080mm |
|
5.wave height |
15mm |
|
6.wave length |
225mm |
|
7.productivity |
8-10m/min |
|
8.Voltage |
380v/50hz, 3 phases |
|
9.material of the blade |
Cr12 |
|
10.hydraulic |
40# |
|
11.Control system |
PLC Control,easy to operate,high precision,and work stably. |
|
12.main power |
5.5kw |
Technical process:
Technical Specification
(1) Manual decoiler
Un-powered; single head;
max.capacity: 5000kg;
Coil inner-diameter: 508mm
(2) Roll-Forming M/C:
Steps:13 Roller Material: 45# steel
Voltage:380V/50Hz. line speed:3-6m/min;
Rolling chromium thickness:0.05 mm
(3) Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.
Stop to cut , Post cut cutting length tolerance: ±2mm
Cutting tool material: GCr12 with quenched treatment 60-62°C
(4) Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 3kw Hydraulic oil :40#
(5)Computer control cabinet :
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted
Computed mode has two modes: automatic and manual one.
(6)Counter :
One counter gauges length, pulses, and decides length
(7) Output table
It used to load the forming plate
Manual decoiler---feed with guide---roll forming---press step---cut with fixed length---output with table
