Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Product: 10/100/1000M Media Converter
Model: NT-3011 Series
Product introduction
 NT-3011  series 10/100/1000M adaptive Ethernet Media Converter adopts switching technique for media conversion, in compliance with IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab standard , supports two types of media network connection, namely 10Base-T,  100Base-TX,  1000Base-T and 1000Base-SX/LX, able to interconvert 10Base-T,  100Base-TX or 1000Base-T twisted pair electrical signal with 1000Base-SX/LX optical signal. It extends the network transmission range from 100m, the limit of copper line, to 80Km on fiber. It supports optical transmission under dual-fiber multi-mode, dual-fiber single mode, and single fiber single mode.
Main Features:

●Support interconversion between 10Base-TX, 100Base-TX or 1000Base-TX self-adaptive and 1000Base-SX/LX
●Completely compatible with switch of CISCO, HUAWEI and 3COM.
●Optical interface supports 1000Base-TX optical transmission standard, enables intercommunication with SFP,GBIC
● Support Full/half duplex self-adaptive transmission mode and auto-negotiations
●Support Automatically detecting and configuring the twisted pair port on the converter to the correct MDI or MDI-X Configuration, convenient for system debug and installation
●Support 802.1Q VLAN tagged packets transmission
● Support QoS, ensure VOIP data package transmission
● Support the port choice of dual-fiber multi-mode, dual-fiber single mode and single fiber single mode, which expands the customers’ requirements

Technical indicators:
Parameters Specification
Access mode 10/100/1000Mbps Gbps Ethernet
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit Ethernet
Wavelength 850nm/1310nm/1550nm
Transmission range Dual-fiber multi-mode :220m( fiber size 62.5/125μm)/550m( fiber size 50/125μm),
Dual-fiber single mode :20/40/60/80Km
Single fiber single mode :20/40/60/80Km
CAT 5 UTP cable:100m
FX and TX Ports 1 RJ45 connector: connect STP/UTP CAT 5 UTP cable
1 optical interface :  dual-fiber multi-mode —SC( fiber size 50,62.5/125μm)
Dual-fiber single mode —SC/FC optical interface ( fiber size 9/125μm)
Single fiber single mode —SC/FC optical interface ( fiber size 9/125μm)
Delay time <10us
Bit error rate: <10-9
MTBF 100,000 hours.
LED indicator lamp POWER(power supply), FX LINK(optical fiber connected action), TP LINK1000(twisted pair connected1000M), TP LINK100(twisted pair connected100M), TP ACT( twisted pair data package forward action)
POWER AC220 0.5A/DC-48(Built-in)
Power consumption 5W
Operating temperature -10~55℃ 
Working humidity 5%~90% 
Storage temperature -40~70℃
Storage temperature 5%~90% no condensation
Dimensions: 26mm(H)*71mm(W)*94mm(D)/height*width*depth(external power supply)
152mm(H)*25mm(W)*128mm(D) height*width*depth ( module card )