Home > Products > Consumer Electronics & Lighting > Lighting > Bulb & Lamp

Product Description

Specification of 150 Watts UFO LED High Bay Light

Item No.	CLS-HBU150-XXXX
Power	150w
Lumen	18750lm
Power Factor	0.98
Input Voltage	AC90-305V
CCT	Warm white, 4300K, 5000K
CRI	Ra>80
Luminous Efficiency	125lm/w
LED Chip Brand	Nichia led & Philips led
LED Driver Brand	Meanwell Driver Brand
Housing Color	Black
IP Grade	IP65
Beam Angle	110 & 120 degree
Material	Aluminum
Working Temperature	-20℃~+50℃
Lifespan	50000 hours
Packing CBM	450*450*260mm≈0.053m3
Pcs/ctn	1
Gross Weight	11.00kg
Warranty	5 years

Product picture:

 

 

 

Product Dimension of 150w led high bay light 

 

Luminous Intensity Distribution:

 

Flux Illumination Lighting:

 

Product Features:

 

Dialux Comparison Chart:

 

Replacement Table:

Installation Type:

 

 

Installation (Hook Hanging and Bracket Hanging)

 

Features:

UFO LED high bay, designed for industrial lighting. Adopting the newest LED lighting technology, longer lifespan, lower maintenance cost, higher efficiency. Unique designed optical light distribution can focus the light to the lighting area, improving the luminaire efficiency, taking the place of traditional HID lamps. The wire is made of flame retardant cable  which reaching 90VO grade.  Wire in blue (AC input wire), brown, (AC input wire) and lime-green( earth wire). 

 

 

Notice:

1.    In case of fire, explosion, electronic shock, the install, inspect and maintenance must be operated by professional people.

2.    Pls make sure the power off before operation!Luminaries must be electronic grounding!

3.    Pls make the voltage supplied is available for the luminaries!

4.    Pls make the luminaries working under the limited working temperature!

5.    In order to guarantee enough air convection, luminaries should not be installed in narrow space!

 

Warranty:

1.    All products use constant LED driver, LED chips, 5 years warranty. (under the condition that products are rightly kept, installed, used , and maintenance. Once the products fail because of improper used or installed or break the products operation manual, we are not responsible for this situation. We will repair or replace the broken products during the warranty. We will charge extra material and labor cost if over warranty.

2.    Pls read the instruction manual careful, all rights reserved .

3.    All products are subject to change without notice. 

 

Maintenance manual:

1.    Cut off power before maintenance

2.    Clean the glass of LED street light regular to keep good light transmission.

3.    Clean the dusk on the surface and heat sink regular to keep good heat dissipation.

4.    Do not use water or strong corrosive liquid to clean the lamp, dry cloth is better.

5.    Replace LED driver: use screwdriver to open the cover, fetch out the driver. You can see three

AC wires, Match brown wire with “L”, Blue with “N”, Kelly or yellow with “G”. The red or white wire on driver is the positive electrode, black wire is the negative electrode. Notice,  pls confirm the positive and negative electrode has not met extremely instead.

 

 

 

Attention:

Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp. Luminaires should not be installed where it is draught, in case of shaking and unstable. 

 

Hook installation steps:

1.    Cut off power before operation.

2.    Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.

3.    Fix the hook before installation and make the it can bear over 3 times weight of the lamp

4.    Connect the lamp with hook and make it is safe.

5.    Connect the power wire:Brown,“L”,connect to LIVE; Blue, “N”,connect to NEUTRAL; Lime-green,connect to EARTH/GROUND 

6.    Light up the luminaires!

 

 

 

Attention:

Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp.

 

Bracket installation steps

1.    Cut off power before installation.

2.    Measure the hole size on the holder,choose suitable screw.

3.    Fix the screw at the place where luminaires will be installed and it should can bear over 3 times the weight of the luminaires

4.    Screw up the screws at both sides of holder, then connect the hold hole with screws, tighten it up.

5.    Connect the power wire:Brown,“L”,connect to LIVE; Blue, “N”,connect to NEUTRAL; Lime-green,connect to EARTH/GROUND   

6.    Light up the luminaires ! 

 

 

 

Application of high efficiency Warm White 150w led high bay light

Warehouse; industrial production workshop; pavilion; stadium; the train station; shopping malls; gas stations and other indoor lighting

Packaging & Shipping

Packing information of 150w led high bay light

one pc one carton, carton dimension: 45*45*26cm

 

Shipping information of 150w led high bay light

• DHL         available 
• TNT         available
• Fedex       available
• By sea / By air and so on

Our Services

a.    we just provide good quality products.

b.    we sure to give you the most  favorable prices.

c.    we provide 5 years warranty.

d.    we have long-term cooperation with our forwarder, so we can provide you the lowest freight cost and the fastest service.

e.    we have professional engineers to design and develop new led lights according to your requirements.

f.     we can design the color boxes for you when you have larger quantity.

g.    we can use your logo and label on our products.

h.    your inquiry will be replied in 10 hours. 

Company Information

    China Light-Sky Technology Co., Ltd is a professional supplier in develop and research, zoucms_d-esign, manufacture and sell LED light fixtures. The factory locates in Shenzhen City. The main products are LED Flood Lights, LED High Bay Lights, LED Tube Lights, LED Spotlights and LED Ceiling Lights. All Products are CE, RoHs standard.

    The company leader engaged into led field on 2002, the R & D teams have rich experience and innovation ability on constant current led driver zoucms_d-esign, led heat sink and construct manufacture, led lighting solutions and applications. The technology and workmanship are developed and strong. Strictly implement quality control and management flow of I Q C, I P Q C, O Q C.

    China Light-Sky won great reputation for the stable quality and good service. Our products exported to European, North America, japan, Australia and many other countries and regions. We have many customers cooperate with each other more than 3 years.

    Except advanced manufacture equipments and measurement instruments and talents, China Light-Sky also builds close relationship with academy department and professors to R&D new technology and lighting solutions. China Light-Sky will always insist on “Customers Foremost, Quality First, People-Oriented and Team Work”, sincerely offer high quality and excellent after sales service to customers.

 

Hongkong Fair pictures :

 

 

Welcome to visit our Factory!

Good quality is trustworthy!

Your enquiry will be highly appreciated!

Thanks in advance!

FAQ

Q1: What is the MOQ?

A1: 1 unit.

 

Q2: What is the delivery time?

A2: For sample 5-7 working days, for batch goods is 10-20 working days according to the Qty.

 

Q3: What is the warranty?

A3: 5 years warranty, if the quality problems occured during this period, we will take on the shipping cost and replacement.

 

Q4: What's the payment method?

A4: T/T, West union and paypal.

 

Q5: What is the certificate?

A5: CE , Rohs