Model: | ODAK DK610 |
---|---|
Brand: | U.S. Ouda ke |
Origin: | Made In United States |
Category: | Metallurgy , Mining & Energy / Energy / Lubricant |
Label: | Corrosion-resistant , Environmental protec , Copper contacts |
Price: |
¥50
/ L
|
Min. Order: | 4 L |
Live Chat: | Last Online:03 May, 2012 |
Conductive oil
Explanation: OAK DK610 conductive oil, by senior compounds and the heat stable synthetic oil made from, with liquidity, can rapidly in the switch and electrical equipment in the contact form on the surface oxidation resistance, high lubrication, the high adhesion of the oil film, ensure the normal power cycle and service life of the metal surface in contact. Application: OAK DK610 conductive oil used in electric current flows through a metal surface, have arcing, prevent sparks produced, anti-oxidation, increases the conductive area and conductive effect, reduce carbon produce functions. ·All kinds of micro switch of the electricity system contacts ·Metal smelting, chemical electrolysis, electroplating, etc industries ·Power transmission and transformation of isolating switch, electrified lines ·Silver welding seam bearing shaft location of electric conductive and interface of conductive, lubrication, wear resistance |
|
Advantages: OAK DK610 conductive anointed with: ·Comply with European Union ROHS the REACH regulation ·Reduce wear and wastage, effectively reduce the sparks occurs, good arcing effect ·Prolong the service life of the product, guarantee the stability of the product use and energy efficiency sex ·Strong oxidation stability, prevent metal surface oxidation and corrosion ·Resistance is extremely low, do not affect a small current through the ·Can effectively improve and increase the area of conductive metal, which greatly improve conductive effect, to reduce the occurrence of short circuit ·And most of the plastic compatibility Approval: OAK DK610 conductive oil has been isolating switch, metallurgy, chemical, electric circuit, electrolysis electroplating production line, which electricity guide rail, skiing, the metal wire interface potentiometer, many OEM producers such as relays of recognition, recommend and extensive testing. |
performance |
Testing principle |
DK610 |
NLG1 level |
|
00 |
color |
ASTM D 1500 |
light yellow |
Density 20℃ |
DIN 51 757 |
0.9 g/ml |
Thickener type |
|
Inorganic |
Base oil |
|
Synthetic oil |
Viscosity index |
ASTM D 2270 |
208 |
Flash point℃ |
ASTM D 92 |
226 |
Pour point℃ |
DIN ISO 3016 |
-237 |
Temperature range℃ |
|
-40~203 |
Copper corrosion |
|
1a |
Oxidation stability100h/100℃ ( ASTM D 942 ) |
|
biggest0.75kg/cm2 |
Evaporation loss weight22h/100℃ ( ASTM D 972 ) |
DIN51581 |
9.2 wt% |
And value |
DIN 51 809 |
0.05mg KOH/g |
resistivity |
|
3.75*1010Ohm*cm |
Operation and storage: according to routine operation conductive oil without risk, if a general phenomenon of the spill, with an inert absorbent material removal with, then wash with water.
Although conductive oil is not high fuel sex, they can burn, should be far away from fire, if on fire, water source, foam, carbon dioxide or dry powder put out the fire. Conductive oil storage place should be enough, in order to prevent pollution.
Packing: 1 KG/pot 15 KG/barrels
Packing: | 4L/pot |
---|---|