Model: | DK603 DK604 |
---|---|
Brand: | - |
Origin: | Made In United States |
Category: | Metallurgy , Mining & Energy / Energy / Lubricant |
Label: | Contact grease , Contacts anointed , Contacts fat |
Price: |
¥50
/ KG
|
Min. Order: | 4 KG |
Live Chat: | Last Online:03 May, 2012 |
Conductive cream (contact lubrication grease)
Explanation: OAK DK series conductive cream, by senior compounds and the heat stable synthetic oil made from, can be in switch and electrical equipment in the contact surface form some thin, stable, and the oil film adhesion, ensure the normal power cycle and service life of the metal surface in contact. Has good performance of corrosion, which can effectively prevent the generation of arc, and the cause of salt or surface oxides jam power cycle. Application: OAK DK series conductive paste used in electric current flows through a metal surface, have arcing, prevent sparks produced, anti-oxidation, increases the conductive area and conductive effect, reduce carbon produce functions. ·All kinds of micro switch of the electricity system contacts ·Metal smelting, chemical electrolysis, etc ·Power transmission and transformation of isolating switch ·Substation of busbar distribution ark LvPai and distribution cables |
|
Advantages: OAK DK series conductive anointed with: ·Comply with European Union ROHS the REACH regulation ·Reduce wear and wastage, effectively reduce the sparks occurs, good arcing effect ·Prolong the service life of the product, guarantee the stability of the product use and energy efficiency sex ·Strong oxidation stability, prevent metal surface oxidation and corrosion ·Resistance is extremely low, do not affect a small current through the ·Can effectively improve and increase the area of conductive metal, which greatly improve conductive effect, to reduce the occurrence of short circuit ·And most of the plastic compatibility Approval: OAK DK series conductive cream has been lighting, all kinds of switch, metal smelting, chemical industry and many other OEM producers of electrolytic recognition, recommend and extensive testing. |
performance |
Testing principle |
DK603 |
DK604 |
DK605 |
DK606 |
DK607 |
DK608 |
NLG1 level |
|
2 |
2 |
2 |
2 |
2 |
2 |
color |
ASTM D 1500 |
white |
light yellow |
white |
gray |
black |
ChiTongSe |
The needle into the work, mm / 10 degrees |
ASTM D 217 |
220 |
228 |
234 |
238 |
245 |
247 |
Drop point, ° F |
ASTM D 566 |
Nothing |
Nothing |
Nothing |
Nothing |
Nothing |
Nothing |
Thickener type |
|
inorganic |
inorganic |
inorganic |
inorganic |
graphite |
Copper powder |
Base oil |
|
Synthetic oil |
Synthetic oil |
Synthetic oil |
Synthetic oil |
Synthetic oil |
Synthetic oil |
viscosity index |
ASTM D 2270 |
106 |
106 |
108 |
108 |
108 |
110 |
oil separation 18h/40℃(IP-121) |
|
Biggest 0.50% |
Biggest 0.50% |
Biggest 0.50% |
Biggest 0.50% |
Biggest 0.50% |
Biggest 0.50% |
Flash point |
ASTM D 92 |
530 |
530 |
560 |
560 |
750 |
760 |
Temperature range℃ |
|
-30~150 |
-30~150 |
-30~150 |
-30~180 |
-40~210 |
-40~210 |
Oxidation stability ,100h/100℃(ASTM D 942) |
Biggest 0.75kg/cm2 |
Biggest 0.75kg/cm2 |
Biggest 0.75kg/cm2 |
Biggest 0.75kg/cm2 |
Biggest 0.78kg/cm2 |
Biggest 0.78kg/cm2 |
|
Oil from degrees% 24hours 350℃ |
2.0-2.4 |
2.2-2.4 |
2.5-2.8 |
2.8-3.2 |
2.9-3.4 |
2.9-3.5 |
|
Evaporation loss, weight ,22h/100℃(ASTM D 972) |
Biggest 2% |
Biggest 2% |
Biggest 2% |
Biggest 2% |
Biggest 2% |
Biggest 2% |
Operation and storage: according to routine operation conductive anointed general no risk, if appear leak phenomenon, with an inert absorbent material removal with, then wash with water.
Although conductive cream is not high fuel sex, they can burn, should be far away from fire, if on fire, water source, foam, carbon dioxide or dry powder put out the fire. Conductive paste should be stored clean place, in order to prevent pollution.
Packing: 1 KG/cans
Packing: | 1 KG/cans |
---|---|