Infrared lamp spray booth (combination)
Product Description
Inside dimension |
6900× 3900× 2650 mm ( L× W× H ) |
Outside dimension |
7000× 5350× 3400 mm ( L× W× H ) |
Front door |
Folding door, 3 folds, 3000× 2600 mm (W× H ), without frame, colour: blue. |
Emergency door |
1 unit, 650× 1800mm (W× H ), colour: white |
Basement |
Galvanized steel assemble, 300mm high, quadrate steel support, 5 rows of grilles made by flat bar and twisted steel, then galvanized. full ramps |
Wall board |
Thickness: 50mm, width: 1150mm, tongue and groove structure, 0.376mm colour steel with 50mm thick polystyrene (EPS) insulation inside, colour: white. |
Light system |
Ceiling Lights: 8Units× 4Pcs=32Pcs× 36W, with electronic ballasts, lighting boxes are powered coated. |
Generator cabinet |
Intake from side upper direction, exhaust from back upper direction aluminium alloy frame; white coated steel covered, filled with heat preservation material in the middle. |
Intake and Exhaust system |
2× 4KW double-intake centrifugal fans for intake, model YDW4.5L1, air capacity for each fan: 12500m 3 /h. |
1× 7.5KW double-intake centrifugal fan for exhaust, model YDW4.5M, air capacity: 20000m 3 /h, with manual damper for exhaust air. |
Heating system |
With short wave infrared lamp heating |
Purification system |
Pre-filter, ceiling filter, fibreglass filter, activated carbon filter |
Roof |
Galvanized steel plates |
Control system |
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter. All motors are normal start. |
Total Power: |
45KW |
Specification for Prep Station
Outside Dimension |
7550× 3550× 3100mm(L× W× H) |
Inside Dimension |
6300× 3450× 2650mm(L× W× H) |
Plenum Dimension |
6300× 3450× 450mm(L× W× H) |
Room Body |
Back side with 50mm EPS wall panels, the other 3 sides with PVC curtains; |
Light system |
Ceiling lights 8units× 4pcs=32pcs 36W, with electronic ballasts |
Generator cabinet |
Exhaust air from back side; square steel frame, white coated steel cover. |
Intake and Exhaust System |
1 unit 5.5KW double intake centrifugal fan, model YDW-4.5S, air capacity: 15500 m 3 /h, electric damper for exhausting. |
Purification System |
Pre-filter, high efficiency filter, exhaust fiberglass filter |
Roof |
Galvanized steel plates |
Control System |
Fan operation switch, lighting switch, emergency stop; |
Install way |
Steel column supporting; |
Total Power |
6.7KW |
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,