TIMER EXTENSION SOCKET (2m)
Product Description
| Technical specifications |
| voltage 220-250V 50-60Hz |
| rated current 10A |
| rated power 2500W |
| Satety |
| Read carefully before usage |
| only suitable for indoor use |
| Ensure voltage shown on the lable match to the mains supply voltage |
| Never overload,see the maximum load on prodact lable |
| install the socket extension in an dry,moisture and dust free place |
| Only operate with dry hands |
| Only rotate timer clock wise,never turn clock anti clockwise that will cause damage to the timer which is not covered by warranty! |
| Make sure cables that run from aquarium have drain loop to avoid danger |
| If damaged the supply cord cannot be replaced,the whole unit needs to be destroyed |
| operation |
| plug in the socket extention,now the timer is running |
| set the timer in line with loccal time by rotating it clockwise |
| pull out the red pins of corresponding time,to make the socket energized during this required period .Each pin means 15 minutes |
| Push back the pins of the corresponding time,to de-energized the socket during your required period.Each pin means 15 minutes. |
| Shite the switch to I,POWER ON，the corresponding socket is always energized ,not controlled by the timer. |
| Shite the switch to 0,POWER OFF，the corresponding socket is always de-energized ,not controlled by the timer. |
| Shite the switch clock ,TIME ON ，now the timer will energized ,or de-energized the cprresponding socket during the set times. |
| Please notice clock will stop running every time you unplug the socket box ,so remenber to reset the correct local time after disconnecting. |
| There is always an small deviation in time for these manual timers,this time differencee will not be more than 10 minutes. |
| Trouble shooting |
| The socket extension is protect againt overpowering by a fuse,if the outlets have no power check the fuse . |
| If there is no power on time outlet on time always check correct setting of symbol 0/I and clock. |
| Warranty |
| This warranty is valid for 2 years on materials and incorrect construction.Only units with a fully filled in warranty slip and official till receipt showing data of purchase will be considered.You must supply the entire unit with accessories in the event of a warranty claim.We will inform you on receipt whether the unit will be repaired or replaced.We accept no responsibility for damage as a result of incorrect use of the unit.breakages of parts not due to defects ex-factory are not covered by this warranty. |
| Recycle infromation |
| The symbol of the barred bin print on the product means thst it must be collected separately from other rubbish when it will not be anymore in use .The user,at the end of the lift of the product,will have to bring it to a proper rubbish collection centre for electric and electrical devices.Alternatively he can return the used product to the seller at the moment he buys a new unit,but only in proportion 1 to 1 ,a differentiated refuse collection is environmentally friendly and it helps the cycling of the meterials,any other collection procedure is unlawful and will be subject to the law in force. |
| Aplication |
| household aplications:lighting,electric fan,electric carpet,electric water heater,recharger ect |
| Aquarium:aquarium light,UV light,CO2 equipment,air pump and other accessories which do not need 24 houroperation. |
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
