Home > Products > Consumer Electronics & Lighting > Lighting > Professional Lighting

   Full Color Animation laser Light User Manual

 Unboxing Check 
     Thank you for using our products, For the sake of safety and better operation of this projector,
 please read this manual carefully before using and operating it, lest incur any personal injury or
 damage to the projector. 

 Package List: 
 1.Projector 1PC         2.AC power supply 1PC           3.Owen’s Manual 1PC           4.SD card 1PC
 Notice:
 1. Please operate the projector according to the Manual strictly.
 2. This unit is intended for indoor use only and should be prevented from water, moisture and shake.
 3. The working temperature of this unit is 15-30 ℃, and it must be powered off after continuously
    working 2 hours to let the laser diode cool down.
 4. To keep the body of this unit clean to avoid any unnecessary troubles.
 5. Do not turn on and off it frequently and try to avoid making it worked for a long time.
 6. Do not use the telescope to watch the laser rays, otherwise will be largen the dangers.
 7. You had better use the original package during the transportation. 

 Warnings: 
 1. The grade of the laser for it is Class III A, and will be dangerous if exposure to the eyes directly.
 2. The working Voltage is 100-240V/50-60Hz, once exceeded this range its lifetime will be shorten. 

 Statement: 
      All the projectors are examined strictly before shipment, In that case the user should operate it
 according to the manual strictly, We and the distributor will not be responsible for any mistakes
 cause by the wrong operations. 

 Specification: 
 1. Power AC power supply input AC100-240V/50~60Hz, Output ＋15V 1000mA/－15V 500mA 
 2. Laser generator-Wavelength：532nm(Green), 660nm(Red),  405nm(Purple)
 3. Dimension:195.5X141X112.5mm
 4. Net Weight ：1.06 kg
 5. Gross Weight: :1.28     kg/pc

  Display Mode Status And Operations

 ◆　Program Table
 ◆　Key Seek
 ◆　Audio Mode
 ◆　Auto Mode
 ◆　System Set
 ◆　Folder Select

 1．Power on and insert SD card. Press slightly the MODE key that the LCD shows “Program Table”. Then press
     ENTER key to play the images inside the SD card in auto mode. If you need switch to next function, please press
     slightly the MODE key to go back to primary menu.

 2 ．Press slightly the Mode key that the LCD shows “Key Seek”. Then press ENTER key. Here just press UP key or
     DOWN key to choose the desired images.

 3 ．Press slightly the MODE key that the LCD shows “Audio Mode”. Then press ENTER key. Now it’s sound
     active mode to play the images saved by IC card inside the product previously. If you need switch to next function,
     please press slightly the MODE key to go back to primary menu.

 4 ．Press slightly the MODE key that the LCD shows “Auto Mode”. Then press ENTER key. Now it’s auto mode to play
     the images saved by IC card inside the product previously. If you need switch to next function, please press slightly
     the MODE key to go back to primary menu.

 5 ．Press slightly the MODE key that the LCD shows “System Set”. Then press ENTER key to choose “ Color Mode Set”.
     Press ENTER key. Now press UP key and DOWN key to choose unicolor, bicolor, or tricolor. Press ENTER key.
     Press UP key and DOWN key to choose “ Sound active Set”. Press ENTER key. Now press UP key and DOWN key
     to set  the sensitivity of sound active. Press ENTER key. Now press UP key and DOWN key to choose “ Phase Set:”
     Press ENTER key. Press UP key and DOWN key to choose X-Y- or X+Y+.

 6 ．Press slightly the MODE key that the LCD shows “Folder Select” to choose folders in SD card. Then press ENTER
     key. Press UP key and DOWN key to choose the desired folders. Then press ENTER key to play the images of
     desired folders.