Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

LED Panel Light 600x600

Body size: 600x600x13mm; Light Area Size (mm): 595x595mm

Input voltage: 110-220VAC

Power Supply: External; Consumption Watts: 36W; Current: 1500mA

LED type: Taiwan SMD; LED quantity: 312pcs

Working Temperature:-10℃-40℃; IP Class: IP20

Warm White: 3000K, 2100lm; Natural White: 4200K, 2400lm; Cold White: 6000K, 2500lm

Packing: 3pcs/ctn, G.W.: 26kgs, carton size: 60.5*66.5*27cm

Warranty: 24 months

1). Energy saved up to 50%, high intensity

2). Instant start, no flickering, no humming

3). New inner high efficiency (95%) With heat protection system, the constant current driver can work under unstable voltage.

4). Special circuit design, each LED can work separately thus it can avoid theinfluence that a broken LED causes.

5). No electric wave. No such hazard that mercury or lead enters the environment. No RF interference

6). It adopts super bright LED as its luminous body.

7). The anodized aluminum frame is stylish and fashionable with everlasting color.

8). It is powered by low voltage constant current driver, which is safety, energy-saving and long life.

9). Excellent thermal management can effectively guarantee the LED's long-term stability. The front panel board is high translucent acrylic, which ensures the light even, soft and high transmittance.

10).The installation is very easy, it can insert into the ceiling directly, and it also can be hanging down by using the lifting hole on the back.

Installation:

1. Turn off the power.

2. Connect the commercial power (90V-250V) with the input of the matched power supply, make sure that no copperware exposed.

3. Connect matched power supply and panel light together through the DC plug.

4. Fix the panel light and power supply at suitable place.

5. Turn on the power.

Application:

Hotel, Meeting Room, Office, Hospital, School and places where energy saves and high color rendering index lighting needed.

Notes

The panel should be driven by appointed power supply.

 Protection film should be removed after installation to keep the panel clean.

To avoid electric shock, keep power off before installation and maintenance