Standard:
Meeting the relative requirements of ISO, ASTM, JIN, GB and many other testing methods. EN10002-1, ISO 6892, ASTM E8, ASTM C39, ASTM F606, SAE J429, CE Compliant
Purpose:
It is suitable for tensile, compression, bending and shear testing for all kinds of metal materials and nonmetal materials, such as plastic, concrete, cement and so on.
The oil cylinder is set on the bottom in the machine, and with double space frames. The test space can be adjusted automatically. The control unit is composed of computer and control system. It can process stress, strain and displacement control modes, so the test data can be stored, and the data and curves can be reanalyzed, partly amplified and data re-edited. Test conditions (specimen, measurement) are programmable. All the mechanical properties can be obtained automatically. It can also print whole test report and curve.
Feature:
1. These frames have dual spaces, so users can quickly change between tension and compression.
2. Making tests without removing heavy fixtures. Control console is with integrated hydraulic power pack.
3. With precise loading regulator and unloading valves, Extra-length screws and columns, and an adjustable upper crosshead, to increase the available test space for longer test samples.
4. Semi-open front hydraulic wedge clamps for easier loading and rapid loading and unloading of specimens.
Complete supplied with :
Main frame; Control console; Controller and sensor; Computer and software; Hydraulic oil pipe and control button box; Sample jaw three sets; Bend support saddle; Bend pressure energy; Spherical compression plate; Lower compression plate; Top board; Ground screw and nut; Inner hexagon spanner; Double offset ring spanner; Other accessories full sets.
