Product included:
Feature:
Adopt CCPM control component metal swashplate,plastic tail rotor gear box set,
belt driven system and professional gyro,which ensure the helicopter react fast on
any kind of 3D acrobatic flying courses and flight stability.
7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down &
Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New
radio control set
High Performace 4500KV Outrunner Brushless Motor used as the main drive and
makes the flight much stable and better performace .
Using alloy tail boom.
Can fly in skyway, backward, and 3D aerobatic
CCPM mixing control system and collective pitch structure
120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the helicopter
and weight is greatly reduced improved blades give superior lift. Their pop off
design gives extra protection in case of heavy landing
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which
provide good aerobatic responds
The autorotation landing system, made of high quality one-way bearing, maximally
protects your helicopter from damage
Hard, Light weight ABS Blades
Brand new design for the structure
Improved battery support that holds the battery firmly, and can also be adjusted to
suit your balance of flying
Tail rotor driven by belt provide stable flight and low noise
NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-
Helicopter No need to worry about burning tail motors
Outer placed Head Lock Gyro
11.1V 900mAh high capacitance Li-Po battery provide enough power for any
aerobatic flight
With length-adjustable servo push-rod, precision sub trim can be easily set
Separate main shaft and main gear reduce repair time and noise
Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
canopy reduce the load of whole helicopter
Easy to fly and more stable lifting
Sky706 2.4G receiving and transmitting system increases the operation stability
With adjustable pitch system and 3D conversion
Provide excellent performance outdoor and indoor
Tail blade adopt flameout landing system
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos can be
mounted solidly by screw and easy to install.
Extreme smooth control and stable flight
Precise controlling and hovering
Digital Proportional Motor Speed Control
Suitable for Indoor/Outdoor/Backyard/Stadium
Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the
Helicopter does have very strong structure. In addition, the main rotor blades are
using top quality ABS Blades , which is extremely light and not easily break
Approximately 15 minutes flight time on each charge - Optional Li- poly battery
will help to achieve better performance and longer flight time.
Best choice for Beginner - Advanced hobbyist
All spare parts and accessories are available
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8
A batteries for the transmitter not included)
Specification:
Main Rotor Diameter : 470mm
Length : 460mm
Flying Weight : 330g
Driven system : Skyartec 4500KV brushless motor
Gyro : Sky600 Head Lock
Servo : 3X Skyartec 9g + 1X Skyartec 5g
ESC : Skyartec 18A
Battery : Skyartec 11.1V 900mAh Li-Po
Control system: SKY706 2.4GHz 7CH Transmitter and SKY706 2.4GHz 7CH Receiver
