Home > Products > Services > Consulting > Technology Consulting

EN 45545-2 Fire test to Railway Components-European Standard
Firetc fire test center will provide European Standard EN 45545-2 Fire test to Railway Components.

EN45545-2 / PrCEN TS 45545-2 Fire test to railway componet - Standard

> EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components

EN 45545-2 / PrCEN TS 45545-2 Fire Test to railway components-Standard Brief

The Content of part 2 is

> Functional description of the fire safety objectives

> The generic material classes and the requirement classes

> Test methods according to the generic material classes

> Characteristic requirement of the system test

> Requirements in principle for selection of testing and test samples

> Interior material construction

EN 45545-2 / PrCEN TS 45545-2 Fire Test to railway components -Test Method

Implementing compliant fire safety measures

> The small scale test methods for testing the fire safety properties are checked to be in consistence with the real scale tests in vehicles

> The flame spread test is also used in the IMO regulation

> Smoke and toxic measurement uses the European smoke chamber EN ISO 5659

> EN 45545-2  R1: Surface Products (Wall,celling)

- Spread of Flame - ISO 5658-2

- Heat Release - ISO 5660-1

- Smoke Density - ISO 5659-2

- Smoke Toxicity - ISO 5659-2

> EN 45545-2  R4:  Air filter material

- Ignition Test - ISO 11925-2

- Heat Release - ISO 5660-1

- Smoke Density - ISO 5659-2

- Smoke Toxicity - ISO 5659-2

> EN 45545-2 R7: Flooring Covering

- Heat Release - ISO 5660-1

- Critical Heat Flux - ISO 9239-1

- Smoke Density - ISO 5659-2

- Smoke Toxicity - ISO 5659-2

> EN 45545-2 R14, R15: Wire & Cable

- Burning test to Single Cable - EN 60332-1-2

- Burning test to Bunch Cable - EN 50266-2-4

- Smoke Density - EN 61034-2

- Smoke Toxicity - NF X70-100-1 & 2

> EN 45545-2 R23: Small Scale Material (Electrical Equipment )

- Oxygen Index - EN ISO 4589-2

- Smoke Density - EN ISO 5659-2

- Smoke Toxicity - NF X70-100-1 & 2

EN 45545-2 / PrCEN TS 45545-2 Fire Test to railway components-Product Scope

- Rubber Products (Seal and filter）

- Melamine foam for thermal insulation

- Sound insulation blanket

- Textile for curtain, seat backing

- Plastic Products (light shade, shell of cell)

- Flooring (glue and adhesive）

- Cable

- Sound insulation blanket

- Electrical Device

- Fire-resistance paint

- Fire-redartant adhesive

- Seat (Sponge)

EN 45545-2 / PrCEN TS 45545-2 Fire Test to railway components-Reference Standard

> EN 45545-1: Fire Protection of railway Vehicles - Part 1: General

> EN 45545-2: Fire Protection of railway Vehicles - Part 2: Requirement for fire behaviour of materials and components

> EN 45545-3: Fire Protection of railway Vehicles - Part 3: Fire resistance requirements for fire barriers and partitions

> EN 45545-4: Fire Protection of railway Vehicles-Part 4: Fire safety requirements for railway rolling stock design

> EN 45545-5: Fire Protection of railway Vehicles-Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

> EN 45545-6: Fire Protection of railway Vehicles- Part 6: Fire control and management system

> EN 45545-7: Fire Protection of railway Vehicles- Part 7: Fire safety requirement for flammable liquid and flammable gas installations

> EN ISO 1182, Reaction to fire tests for building products. Non-combustibility test (ISO 1182:2002)

> EN ISO 1716, Reaction to fire tests for building products. Determination of the heat of combustion (ISO 1716:2002)

> EN ISO 9239-1, Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002)

> EN ISO 11925-2, Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test (ISO 11925-2:2002)

> EN ISO 4589-2:ISO 4589-2: Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test

> NF X70-100: Fire behaviour tests -Analysis of pyrolysis and combustion gases – Pipe still method

> ISO 5659-2: Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test

> EN ISO 5658-2, Reaction to fire tests. Spread of flame. Lateral spread on building products in vertical configuration

> ISO 5660-1: Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method)

> EN ISO 12952-3: Texitile. Flammability
> EN 50266-2-4 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-4: procedures-Category C

> EN 50305: Railway applications. Railway rolling stock cables having special fire performance. Test methods

> EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame

> EN 61034-1: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus