Home > Products > Industrial Supplies > Other Industrial Supplies

YB6212, PC Universal Spline Shaft Milling Machine YB6212PC Universal Spline Shaft Milling Machine YB6212/PC Universal Spline Shaft Milling Machine *The machine bed is made of high-quality cast iron and tempered to enhance the overall shock resistance of the machine tool, and the machine tool guide rail is treated with high frequency quenching , The surface hardness is high to prolong the service life of the guide rail surface.*The surface of the spindle is treated by nitriding grinding and polishing, with high surface hardness and durability.1. The use and performance of the machine tool This machine tool is a semi-automatic universal spline shaft milling machine, which is used for hobbing and milling of spline shaft parts of various tooth shapes, and can also hob and mill straight tooth, helical tooth cylindrical connecting shafts with less than 36 teeth. gear.1. The machine tool can complete the automatic working cycle. If there are special order requirements, there are two working cycles for selection.One working cycle is used for processing with only one cut, and the second working cycle is used for rough and fine secondary cutting.The rough-finishing cycle is automatically converted, and the finishing allowance can be adjusted.2. The feed method can be axial feed of workpiece or radial of hob - axial feed of workpiece.3. There is a gap adjustment mechanism in the axial movement nut of the machine tool, which can work in the "down milling" or "up milling" processing mode.4. The machine tool has a manual tool shifting mechanism for the hob, which is used to perform "tool setting" and improve tool life.5. Equipped with workpiece center frame and bracket for processing slender spline shaft parts and facilitating the installation of workpieces.6. The main parts of the machine tool are automatically lubricated.Machine features: * The machine bed is made of high-quality cast iron and tempered to enhance the overall anti-vibration performance of the machine tool. The machine tool guide rail is treated with high frequency quenching, and the surface hardness is high to prolong the service life of the guide rail surface.*The surface of the spindle is treated by nitriding grinding and polishing, with high surface hardness and durability.*The main components are quenched and tempered, carburized and quenched.2. Technical Specifications Project Parameters Project Parameters Maximum Machining Diameter 125mm Machine Weight About 4000kg Maximum Machining Length 900mm Cooling Pump Motor 0.12KW Maximum Machining Module 4mm Outline Dimensions 2575×1686×1653mm Processing Teeth 4-36 Teeth Head The diameter of the spindle hole is 70mm, the helix angle of the workpiece is 45°. MIN) 160/30mm fast moving speed of sliding plate 1m/min maximum installed hob size (diameter/length) 130/115mm main motor power 4KW cutter bar diameter 22, 27, 32, 40 fast motor 1.5KW maximum tool shifting 40mm hydraulic Motor 1.1KW Milling head maximum adjustment angle 90º